Lesso America
PVC DWV P-Trap w/Cleanout (HUB x HUB)
- SKU:
- LP707X
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
PVC DWV P-Trap w/Cleanout (HUB x HUB)
PVC DWV P-Traps with Cleanout are designed to maintain a water seal that helps prevent sewer gases and odors from entering occupied spaces while providing convenient access to the trap for inspection, cleaning, and maintenance.
Featuring hub connections on both ends and an integrated cleanout, this fitting combines dependable fixture drainage with easier service access. Durable PVC construction provides corrosion resistance and reliable long-term performance in compatible residential and commercial non-pressure drain, waste, and vent systems.
Product Highlights
- PVC DWV P-trap with integrated cleanout
- Hub x Hub connection configuration
- Maintains a water seal to help block sewer gases and odors
- Cleanout provides convenient trap access for maintenance
- Designed for drain, waste, and vent systems
- Both hubs accept compatible PVC DWV pipe
- Solvent-weld installation
- Smooth internal surfaces support efficient wastewater flow
- Durable, corrosion-resistant PVC construction
- Suitable for residential and commercial plumbing applications
- Designed for non-pressure service
Technical Specifications
| Product Type | DWV P-Trap with Cleanout |
|---|---|
| Material | PVC |
| Connection Type | Hub x Hub |
| Joint Method | Solvent Weld |
| Cleanout | Integrated Cleanout Access |
| System Type | Drain, Waste & Vent (DWV) |
| Pressure Service | Non-Pressure |
| Primary Function | Fixture Drain Trap / Water Seal with Maintenance Access |
| Referenced Standards | ASTM D2665, ASTM D1784, CSA B181.2, and Applicable NSF/ANSI Standards |
| Typical Applications | Residential and Commercial Fixture Drain Systems |
Connection & Cleanout Configuration
Inlet Hub
The inlet hub accepts compatible PVC DWV pipe from the fixture drain side of the plumbing system.
P-Trap & Cleanout
The curved trap body retains water to form the trap seal, while the integrated cleanout provides access for inspection, cleaning, and maintenance.
Outlet Hub
The outlet hub connects to compatible downstream PVC DWV piping and directs wastewater toward the drainage system.
Construction Details
Manufactured from durable PVC, this P-trap provides resistance to corrosion, moisture, and many chemicals commonly encountered in compatible drain, waste, and vent systems.
The curved trap body retains a small amount of water after drainage, creating a water seal that helps limit the passage of sewer gases and odors through the fixture drain.
An integrated cleanout provides direct access to the trap area, simplifying inspection and removal of accumulated debris without requiring removal of the entire solvent-welded trap assembly.
Why Choose a P-Trap with Cleanout?
Trap Seal Protection
- Maintains a water seal after drainage
- Helps prevent sewer gases from entering occupied areas
- Helps control drain odors
- Supports proper fixture drainage
- Designed specifically for DWV service
Easier Maintenance Access
- Integrated cleanout provides access to the trap
- Helps simplify inspection
- Provides access for clearing accumulated debris
- Reduces the need to disturb permanent solvent-weld joints
- Useful where future trap servicing may be required
Typical Applications
Residential Plumbing
- Sink drain systems
- Utility sink installations
- Fixture waste piping
- Accessible trap installations
- General residential DWV systems
Commercial Plumbing
- Commercial fixture drains
- Service sink installations
- Fixture waste lines
- Applications requiring cleanout access
- Building drainage systems
Solvent-Weld Installation
Verify the nominal hub size and intended fixture drain configuration before installation. Cut compatible PVC DWV pipe square and remove burrs or debris from the pipe ends.
Prepare the hub and pipe surfaces according to accepted PVC solvent-weld procedures. Apply compatible PVC primer and solvent cement where required, then fully seat the pipe into each hub.
Orient the P-trap correctly so the trap can maintain its intended water seal and position the cleanout where it can remain accessible for future inspection or maintenance. Allow solvent-weld joints to cure according to the cement manufacturer's recommendations before normal service.
Our plumbing specialists can help review your fixture type, drain size, connection requirements, cleanout accessibility, and DWV installation layout before you order.
Email the GetPipe.com Team Visit Quick SupportFrequently Asked Questions
What does the cleanout on this P-trap do?
The integrated cleanout provides access to the trap area for inspection, cleaning, and removal of accumulated debris.
What is the purpose of the P-trap?
The P-trap retains water after drainage, creating a seal that helps prevent sewer gases and odors from passing back through the fixture drain.
What does HUB x HUB mean?
Both primary pipe connections are hub or socket ends designed to accept compatible PVC DWV pipe.
How are the hub connections installed?
The hub connections are intended for solvent-weld installation using compatible PVC DWV pipe, primer, and solvent cement as required.
Why choose a P-trap with a cleanout instead of a standard P-trap?
The cleanout provides additional maintenance access, making it easier to inspect or clear the trap without disturbing the permanent hub connections.
Should the cleanout remain accessible?
Yes. The cleanout should be positioned so it can be reached for future inspection and maintenance.
Is this fitting intended for pressure piping?
No. This fitting is designed for non-pressure drain, waste, and vent applications.
Can this fitting be used in residential and commercial systems?
Yes. It is suitable for compatible residential and commercial non-pressure DWV applications.
What standards are referenced for this fitting?
The supplied product information references ASTM D2665, ASTM D1784, CSA B181.2, and applicable NSF/ANSI standards.
What should I verify before ordering?
Confirm the required nominal size, fixture drain configuration, available installation space, cleanout accessibility, and compatibility with the intended PVC DWV system.
Important Ordering & Installation Notes
- This listing is for a PVC DWV P-Trap with integrated cleanout and HUB x HUB connections.
- Verify the required nominal pipe size before ordering.
- Both hubs accept compatible PVC DWV pipe.
- The trap is designed to retain water and help block sewer gases and odors.
- The integrated cleanout should remain accessible after installation.
- Designed for non-pressure drain, waste, and vent applications.
- Use compatible PVC primer and solvent cement where required.
- Cut pipe square and remove burrs before installation.
- Clean and prepare all mating surfaces before solvent welding.
- Fully seat each pipe into the appropriate hub.
- Install the trap in the proper orientation to maintain the intended water seal.
- Position the cleanout for convenient future maintenance access.
- Allow solvent-weld joints to cure according to the cement manufacturer's recommendations.
- Do not use this fitting for pressure applications.
- Verify applicable plumbing code requirements for trap placement, cleanout accessibility, and venting.
- Follow manufacturer installation recommendations.
