Spears
PVC DWV Long Sweep 90 Degree Street Elbow (H x S)
- SKU:
- P309
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
PVC DWV Long Sweep 90 Degree Street Elbow (H x S)
PVC DWV Long Sweep 90 Degree Street Elbow (H x S) provides a gradual 90-degree directional transition within compatible PVC drain, waste, and vent piping. The street-style long sweep combines a hub connection with a spigot connection for integration with compatible PVC DWV components.
The H x S long sweep 90 degree street elbow configuration provides a broader-radius directional change while combining two different connection interfaces. Selection should account for nominal size, hub and spigot compatibility, adjoining components, sweep orientation, joining requirements, piping alignment, support, and available installation clearance.
Product Highlights
- PVC construction
- DWV fitting design
- Street elbow configuration
- Long sweep 90° transition
- Hub x spigot connections
- Provides a gradual directional turn
- Connects compatible PVC DWV components
- Combines a broad-radius sweep with hub and spigot interfaces
Technical Specifications
| Product Type | Long Sweep 90° Street Elbow |
|---|---|
| Material | PVC |
| System Type | DWV |
| Connection | Hub x Spigot (H x S) |
| Connection Count | Two |
| Fitting Configuration | Long Sweep Street Elbow |
| Hub Interface | Compatible PVC DWV Pipe |
| Spigot Interface | Compatible Receiving Hub |
| Joining Method | Compatible PVC DWV Joining Procedure |
| Directional Change | 90° |
| Sweep Style | Long Sweep |
| Primary Function | Provide a Gradual 90-Degree Transition Between Compatible PVC DWV Components |
Long Sweep Street Design
The long sweep street elbow configuration provides a broad-radius 90-degree transition while incorporating a spigot interface at one end. This arrangement combines a gradual directional change with the compact connection characteristics of a street-style fitting.
The elbow orientation should be established before permanent joining so both connection interfaces correspond with the intended piping route. Planning the position helps coordinate adjoining components, nearby fittings, support, and available working clearance.
Hub & Spigot Connections
The hub connection receives appropriately sized compatible PVC DWV pipe, while the spigot connection fits into a compatible receiving hub. Each interface should be matched to the intended adjoining component before assembly.
The mating surfaces should be prepared using the appropriate PVC DWV joining procedure. Proper insertion, compatible joining materials, correct sweep orientation, and careful alignment help establish the connections without unnecessary stress on the fitting.
PVC DWV Integration
The PVC DWV construction allows the long sweep street elbow to integrate into compatible drain, waste, and vent piping arrangements requiring a gradual right-angle transition. Matching the nominal size and H x S interfaces to the adjoining components helps maintain the intended piping configuration.
Application suitability should be evaluated using the requirements of the complete DWV system. Adjoining materials, connection compatibility, joining materials, piping support, slope where applicable, and local installation requirements should all be considered during fitting selection.
90° Sweep Transition
A PVC DWV Long Sweep 90 Degree Street Elbow provides a gradual method of redirecting compatible piping through a right-angle turn. The H x S arrangement combines a receiving hub and spigot interface within the same fitting.
Installation planning should consider sweep orientation, adjoining component alignment, nearby fittings, available clearance, and piping support. Connected components should align naturally without forcing the elbow into position.
Installation & Selection Considerations
- Confirm the nominal size.
- Verify the H x S arrangement.
- Check PVC DWV compatibility.
- Confirm the required 90° sweep orientation.
- Align adjoining components before assembly.
Our PVC fitting specialists can help review your nominal size, DWV requirements, H x S configuration, adjoining PVC components, required sweep orientation, joining requirements, piping alignment, support requirements, and available installation clearance before you order.
Frequently Asked Questions
What is a PVC DWV Long Sweep 90 Degree Street Elbow used for?
It provides a gradual 90-degree transition between compatible PVC DWV components.
What does H x S mean?
It identifies a hub connection at one end and a spigot connection at the other.
What connects to the hub end?
The hub end receives appropriately sized compatible PVC DWV pipe.
What connects to the spigot end?
The spigot end fits into an appropriately sized compatible receiving hub.
Does sweep orientation matter?
Yes. The elbow should be positioned so the 90-degree sweep corresponds with the intended piping route.
What should I confirm before ordering?
Confirm the nominal size, H x S arrangement, PVC DWV compatibility, and required sweep orientation.
Important Ordering & Installation Notes
- Inspect both connections before use.
- Confirm the nominal connection size.
- Verify the H x S arrangement.
- Prepare adjoining components correctly.
- Set the sweep orientation before assembly.
