Lesso America
PVC DWV Cleanout Tee W/C.O. Plug (HUB x HUB)
- SKU:
- LP444X
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
PVC DWV Cleanout Tee W/C.O. Plug (HUB x HUB)
PVC DWV Cleanout Tees with Cleanout Plug provide an accessible maintenance point within non-pressure drain, waste, and vent piping systems.
Featuring hub connections for inline solvent-weld installation and an included cleanout plug, this fitting allows convenient access to the piping system for inspection, cleaning, and maintenance. Durable PVC construction provides corrosion resistance and dependable long-term service in residential, commercial, and institutional DWV applications.
Product Highlights
- PVC DWV cleanout tee with included cleanout plug
- Hub x Hub inline connection configuration
- Provides convenient access for drain cleaning and maintenance
- Designed for non-pressure drain, waste, and vent systems
- Hub ends accept compatible PVC DWV pipe
- Solvent-weld installation
- Removable cleanout plug allows future system access
- Smooth internal surfaces support efficient drainage flow
- Durable corrosion-resistant PVC construction
- Lightweight and easy to install
- Suitable for residential, commercial, and institutional DWV systems
Technical Specifications
| Product Type | DWV Cleanout Tee with Cleanout Plug |
|---|---|
| Material | PVC |
| Run Connection | Hub x Hub |
| Access Connection | Cleanout Opening with Removable Plug |
| Joint Method | Solvent Weld |
| System Type | Drain, Waste & Vent (DWV) |
| Pressure Service | Non-Pressure |
| Primary Function | Inline DWV Connection with Maintenance Access |
| Referenced Standards | ASTM D2665, ASTM D1784, CSA B181.2, and Applicable NSF/ANSI Standards |
| Typical Applications | Residential, Commercial, and Institutional DWV Systems |
Connection Configuration
Inlet Hub
The first hub accepts compatible PVC DWV pipe for a permanent solvent-weld connection.
Cleanout Access
The cleanout opening includes a removable plug that allows access to the piping system for inspection, cleaning, or maintenance.
Outlet Hub
The opposite hub accepts compatible PVC DWV pipe to continue the main piping run.
Construction Details
The cleanout tee is manufactured from durable PVC for resistance to corrosion, chemicals, moisture, and long-term wear in compatible DWV systems.
Hub connections at the run are designed for solvent-cement joining to compatible PVC pipe, creating secure permanent joints when properly installed.
The included cleanout plug provides a removable closure for the access opening, making future maintenance possible without cutting into the piping system.
Why Choose a Cleanout Tee?
Convenient Maintenance Access
- Provides an accessible cleanout point
- Allows drain-cleaning equipment to enter the piping system
- Simplifies inspection and maintenance
- Removable plug keeps the opening sealed during normal use
- Can reduce the need to cut piping for future access
PVC DWV Construction
- Corrosion-resistant material
- Lightweight construction
- Resistant to many common plumbing chemicals
- Designed for solvent-weld assembly
- Suitable for long-term non-pressure service
Typical Applications
Residential DWV Systems
- Building drain cleanouts
- Waste piping maintenance points
- Basement and utility piping
- Fixture drainage systems
- General residential DWV access
Commercial & Institutional DWV
- Commercial building drains
- Waste piping access points
- Maintenance and service locations
- Repair and retrofit work
- Institutional plumbing systems
Solvent-Weld Installation
Cut compatible PVC DWV pipe square and remove burrs before installation. Clean and prepare the pipe ends and hub connections according to accepted PVC solvent-weld procedures.
Apply compatible PVC primer and solvent cement where required, fully seat each pipe into the appropriate hub, and orient the cleanout opening so it remains accessible for future service.
Allow completed solvent-weld joints to cure according to the cement manufacturer's recommendations before placing the system into normal service. Install the cleanout plug securely without overtightening.
Our plumbing specialists can help review your pipe size, cleanout location, access requirements, and solvent-weld installation needs before you order.
Email the GetPipe.com Team Visit Quick SupportFrequently Asked Questions
What is a PVC DWV cleanout tee?
It is an inline DWV fitting that includes a dedicated access opening for cleaning, inspection, and maintenance of the piping system.
Does this fitting include the cleanout plug?
Yes. This listing is for the cleanout tee with a cleanout plug included.
What does HUB x HUB mean?
Hub x Hub refers to the two inline socket connections that accept compatible PVC DWV pipe for solvent-weld installation.
What is the cleanout opening used for?
The cleanout opening allows access to the piping system for drain-cleaning equipment, inspection, and maintenance.
Should the cleanout remain accessible after installation?
Yes. The cleanout should be positioned so the plug can be reached and removed when future maintenance is required.
How is the fitting installed?
The two hub connections are installed using compatible PVC solvent-weld procedures, while the cleanout plug remains removable for service access.
Is this fitting intended for pressure piping?
No. This fitting is intended for non-pressure drain, waste, and vent applications.
What material is the fitting made from?
The cleanout tee is manufactured from durable, corrosion-resistant PVC.
What standards are referenced for this fitting?
The supplied product information references ASTM D2665, ASTM D1784, CSA B181.2, and applicable NSF/ANSI standards.
What should I verify before ordering?
Confirm the nominal pipe size, Hub x Hub configuration, required cleanout location, and compatibility with the intended PVC DWV system.
Important Ordering & Installation Notes
- This listing is for a PVC DWV Cleanout Tee with HUB x HUB run connections and an included cleanout plug.
- Verify the required nominal pipe size before ordering.
- Both hub ends accept compatible PVC DWV pipe.
- The cleanout opening should remain accessible after installation.
- Designed for non-pressure drain, waste, and vent applications.
- Use compatible PVC primer and solvent cement where required.
- Cut pipe square before installation.
- Remove burrs and clean all mating surfaces before solvent welding.
- Fully seat pipe into each hub during assembly.
- Orient the cleanout opening for practical future maintenance access.
- Allow completed joints to cure according to the cement manufacturer's recommendations.
- Install the cleanout plug securely and avoid overtightening.
- Do not use this fitting for pressure applications.
- Verify applicable plumbing code and cleanout-access requirements before installation.
- Follow manufacturer installation recommendations.
