Spears
PVC DWV 90 Degree Sanitary Tee w/ 2" R & L Side Inlets
- SKU:
- P418
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
PVC DWV 90 Degree Sanitary Tee w/ 2" R and L Side Inlets (H x H x H x H)
PVC DWV 90 Degree Sanitary Tee w/ 2" R and L Side Inlets (H x H x H x H) provides a multi-directional branch connection within compatible PVC drain, waste, and vent piping. The fitting incorporates hub connections and additional 2" right- and left-side inlets so multiple compatible branch lines can connect at one fitting location.
The H x H x H x H sanitary tee configuration combines multiple hub-style connections within one PVC DWV fitting. Selection should account for nominal sizes, right- and left-side inlet orientation, adjoining pipe, joining requirements, piping alignment, support, and available installation clearance.
Product Highlights
- PVC construction
- DWV fitting design
- Sanitary tee configuration
- Hub connection arrangement
- Includes 2" right and left side inlets
- Provides multiple branch connections
- Connects compatible PVC DWV pipe sections
- Combines a sanitary tee with two additional side inlets within one fitting
Technical Specifications
| Product Type | Sanitary Tee with Side Inlets |
|---|---|
| Material | PVC |
| System Type | DWV |
| Connection | Hub x Hub x Hub x Hub (H x H x H x H) |
| Fitting Configuration | 90° Sanitary Tee |
| Side Inlets | 2" Right and Left Side Inlets |
| Connection Interface | Compatible PVC DWV Pipe |
| Connection Style | Hub |
| Joining Method | Compatible PVC DWV Joining Procedure |
| Branch Orientation | 90° with Right and Left Side Inlets |
| Piping Configuration | Multi-Directional Branch Connection |
| Primary Function | Provide a Sanitary Branch Connection with Additional 2" Right and Left Side Inlets |
Sanitary Tee Design
The sanitary tee configuration provides a main piping connection with a branch while incorporating additional right- and left-side inlets. This allows multiple compatible PVC DWV piping connections to meet at one fitting location.
The fitting orientation should be established before permanent joining so the sanitary branch and both 2" side inlets correspond with the intended piping layout. Planning the installation helps coordinate adjoining pipe, nearby fittings, support, and available working clearance.
Hub Connections
The hub connections receive appropriately sized compatible PVC DWV pipe. Each connection should be matched to the correct adjoining pipe size and location before permanent assembly.
The mating surfaces should be prepared using the appropriate PVC DWV joining procedure. Proper insertion, compatible joining materials, correct fitting orientation, and careful alignment help establish the connections without unnecessary stress on the fitting.
PVC DWV Integration
The PVC DWV construction allows the fitting to integrate into compatible drain, waste, and vent piping arrangements requiring multiple branch connections. Matching each nominal size and connection interface to the adjoining PVC pipe helps maintain the intended piping configuration.
Application suitability should be evaluated using the requirements of the complete DWV system. Adjoining materials, connection compatibility, joining materials, piping support, slope where applicable, and local installation requirements should all be considered during fitting selection.
2" Right & Left Side Inlets
The 2" right and left side inlets provide additional branch connections from opposite sides of the fitting body. This can simplify piping layouts where multiple compatible lines must connect near the sanitary tee location.
Installation planning should consider both inlet orientations, adjoining pipe alignment, nearby fittings, available clearance, and piping support. Connected piping should align naturally so the fitting is not relied upon to correct offsets or support improperly positioned pipe.
Installation & Selection Considerations
- Confirm every nominal size.
- Verify the H x H x H x H arrangement.
- Check PVC DWV compatibility.
- Confirm both 2" side inlet orientations.
- Set the fitting position before assembly.
Our PVC fitting specialists can help review your nominal sizes, DWV requirements, H x H x H x H configuration, 2" right- and left-side inlets, adjoining PVC pipe, branch orientation, joining requirements, piping alignment, support requirements, and available installation clearance before you order.
Frequently Asked Questions
What is this PVC DWV sanitary tee used for?
It provides a sanitary branch connection while incorporating additional 2" right- and left-side inlets.
What does H x H x H x H mean?
It identifies four hub-style connections within the fitting configuration.
What do the 2" right and left side inlets do?
They provide additional 2" branch connections on opposite sides of the fitting body.
What connects to the hub openings?
The hub openings receive appropriately sized compatible PVC DWV pipe.
Does fitting orientation matter?
Yes. The fitting should be positioned so the sanitary branch and both side inlets correspond with the intended piping layout.
What should I confirm before ordering?
Confirm every nominal size, the H x H x H x H arrangement, both 2" side inlets, PVC DWV compatibility, and required fitting orientation.
Important Ordering & Installation Notes
- Inspect all connections before use.
- Confirm every nominal connection size.
- Verify the H x H x H x H arrangement.
- Confirm both 2" side inlet positions.
- Set the fitting orientation before assembly.
