Spears
PVC DWV 90 Degree Sanitary Tee w/ 2" Right Side Inlet
- SKU:
- P417
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
PVC DWV 90 Degree Sanitary Tee w/ 2" Right Side Inlet (S x H x H)
PVC DWV 90 Degree Sanitary Tee w/ 2" Right Side Inlet (S x H x H) provides a multi-directional branch connection within compatible PVC drain, waste, and vent piping. The fitting combines one spigot connection with two hub connections and incorporates an additional 2" right-side inlet for the intended piping layout.
The S x H x H sanitary tee configuration combines different connection interfaces within one PVC DWV fitting. Selection should account for nominal sizes, spigot and hub compatibility, right-side inlet orientation, adjoining pipe, joining requirements, piping alignment, support, and available installation clearance.
Product Highlights
- PVC construction
- DWV fitting design
- Sanitary tee configuration
- Spigot and hub connections
- Includes 2" right side inlet
- Provides multiple branch connections
- Connects compatible PVC DWV components
- Combines a sanitary tee with a 2" right-side inlet in one fitting
Technical Specifications
| Product Type | Sanitary Tee with Side Inlet |
|---|---|
| Material | PVC |
| System Type | DWV |
| Connection | Spigot x Hub x Hub (S x H x H) |
| Fitting Configuration | 90° Sanitary Tee |
| Side Inlet | 2" Right Side Inlet |
| Spigot Interface | Compatible Receiving Hub |
| Hub Interface | Compatible PVC DWV Pipe |
| Joining Method | Compatible PVC DWV Joining Procedure |
| Branch Orientation | 90° with Right Side Inlet |
| Piping Configuration | Multi-Directional Branch Connection |
| Primary Function | Provide a Sanitary Branch Connection with an Additional 2" Right Side Inlet |
Sanitary Tee Design
The sanitary tee configuration provides a main piping connection with a branch while incorporating an additional right-side inlet. This allows multiple compatible PVC DWV piping connections to meet at one fitting location.
The fitting orientation should be established before permanent joining so the sanitary branch and 2" right-side inlet correspond with the intended piping layout. Planning the installation helps coordinate adjoining pipe, nearby fittings, support, and available working clearance.
Spigot & Hub Connections
The spigot connection fits into an appropriately sized compatible receiving hub, while the hub connections receive compatible PVC DWV pipe. Each connection should be matched to the correct adjoining component before permanent assembly.
The mating surfaces should be prepared using the appropriate PVC DWV joining procedure. Proper insertion, compatible joining materials, correct fitting orientation, and careful alignment help establish the connections without unnecessary stress on the fitting.
PVC DWV Integration
The PVC DWV construction allows the fitting to integrate into compatible drain, waste, and vent piping arrangements requiring multiple connection types. Matching each nominal size and connection interface to the adjoining components helps maintain the intended piping configuration.
Application suitability should be evaluated using the requirements of the complete DWV system. Adjoining materials, connection compatibility, joining materials, piping support, slope where applicable, and local installation requirements should all be considered during fitting selection.
2" Right Side Inlet
The 2" right side inlet provides an additional branch connection from the fitting body. This can simplify piping layouts where another compatible line must connect near the sanitary tee location.
Installation planning should consider inlet orientation, adjoining pipe alignment, nearby fittings, available clearance, and piping support. Connected piping should align naturally so the fitting is not relied upon to correct offsets or support improperly positioned pipe.
Installation & Selection Considerations
- Confirm every nominal size.
- Verify the S x H x H arrangement.
- Check PVC DWV compatibility.
- Confirm the 2" right side inlet orientation.
- Set the fitting position before assembly.
Our PVC fitting specialists can help review your nominal sizes, DWV requirements, S x H x H configuration, 2" right-side inlet, adjoining PVC pipe, branch orientation, joining requirements, piping alignment, support requirements, and available installation clearance before you order.
Frequently Asked Questions
What is this PVC DWV sanitary tee used for?
It provides a sanitary branch connection while incorporating an additional 2" right-side inlet.
What does S x H x H mean?
It identifies one spigot connection and two hub connections within the fitting configuration.
What does the 2" right side inlet do?
It provides an additional 2" branch connection on the right side of the fitting body.
What connects to the spigot end?
The spigot end fits into an appropriately sized compatible receiving hub.
What connects to the hub openings?
The hub openings receive appropriately sized compatible PVC DWV pipe.
What should I confirm before ordering?
Confirm every nominal size, the S x H x H arrangement, 2" right-side inlet, PVC DWV compatibility, and required fitting orientation.
Important Ordering & Installation Notes
- Inspect all connections before use.
- Confirm every nominal connection size.
- Verify the S x H x H arrangement.
- Confirm the 2" right side inlet position.
- Set the fitting orientation before assembly.
