Lesso America
PVC DWV 1/4 Bend with Side Inlet (HUB x HUB x HUB)
- SKU:
- LP300S-
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
PVC DWV 1/4 Bend with Side Inlet (HUB x HUB x HUB)
PVC DWV 1/4 Bend with Side Inlet (HUB x HUB x HUB) provides a directional change while incorporating an additional branch connection within compatible PVC drainage, waste, and vent piping systems. The fitting combines three hub connections within one molded bend configuration.
The HUB x HUB x HUB configuration provides receiving hubs at the two primary bend connections and the side inlet. Its three-way design allows the piping run to change direction while introducing an additional compatible DWV branch connection.
Product Highlights
- PVC construction
- DWV bend design
- Three hub connections
- Side inlet configuration
- HUB x HUB x HUB connection style
- Changes the main piping direction
- Provides an additional branch connection
- Combines a directional bend and side inlet in one fitting
Technical Specifications
| Product Type | 1/4 Bend with Side Inlet |
|---|---|
| Manufacturer | LESSO America |
| Material | PVC |
| Product Series | PVC DWV Fittings |
| Connection | Hub x Hub x Hub |
| Connection Abbreviation | HUB x HUB x HUB |
| Number of Connections | 3 |
| Configuration | Quarter Bend with Side Inlet |
| Primary Function | Provide a Directional Change with an Additional Branch Connection |
Connection Configuration
The first receiving hub accepts appropriately sized compatible PVC DWV pipe and forms one side of the primary bend connection.
The second receiving hub continues the primary piping path through the directional bend.
The additional hub provides a branch connection for appropriately sized compatible PVC DWV piping.
1/4 Bend with Side Inlet Design
The 1/4 bend with side inlet combines a directional change with an additional branch connection within one molded PVC DWV fitting.
The two primary hub connections establish the bend in the piping run, while the third hub provides the side inlet for an adjoining branch connection.
Integrating the bend and branch into one fitting can simplify layouts that would otherwise require multiple separate fittings at the same location.
Why Choose a PVC DWV 1/4 Bend with Side Inlet?
- Three-way fitting
- Two main hubs
- Changes piping direction
- Compact molded body
- Supports DWV routing
- Third hub connection
- Creates a branch point
- PVC construction
- Compatible DWV use
- Reduces separate branch fittings
Typical Applications
- Drain piping
- Waste piping
- Vent systems
- Residential DWV layouts
- Commercial DWV installations
- Branch piping
- Drain transitions
- Waste piping layouts
- Multi-connection layouts
- Side inlet connections
Standards & Compliance
- PVC DWV System Compatibility – Select the fitting according to the requirements of the adjoining drainage, waste, and vent piping system.
- Manufacturer Documentation – Confirm applicable dimensions, standards, certifications, listings, and connection requirements using current LESSO technical literature.
- Project Requirements – Verify applicable plumbing, DWV, branch-connection, directional-change, and local authority requirements before installation.
Requirements can vary according to fitting size, side inlet configuration, installation orientation, adjoining piping, and the complete DWV system.
Refer to the Lesso Product Catalog and PVC Schedule 40 & DWV Technical Manual for current dimensional information, standards, certifications, listings, and technical requirements.
Construction Details
The fitting is manufactured from PVC and incorporates three receiving hub connections within a molded quarter-bend body.
The two primary hubs create the directional transition, while the third hub provides the side inlet for compatible branch piping.
The one-piece construction integrates the bend and branch connection into one compact PVC DWV fitting.
Installation & Selection Considerations
- Confirm all required connection sizes.
- Verify the HUB x HUB x HUB configuration.
- Check PVC DWV system compatibility.
- Confirm the required bend orientation.
- Verify the required side inlet position.
Review the Lesso Product Catalog and PVC Schedule 40 & DWV Technical Manual for additional bend information, side inlet configurations, hub connection details, dimensions, standards, and technical guidance for compatible PVC DWV piping systems.
Need Help Selecting a PVC DWV 1/4 Bend with Side Inlet?
Our GetPipe.com team can help review all required sizes, HUB x HUB x HUB configuration, bend orientation, side inlet position, adjoining DWV pipe, and system compatibility before you order.
Frequently Asked Questions
What is a PVC DWV 1/4 Bend with Side Inlet used for?
It changes the direction of the main piping run while providing an additional branch connection through the side inlet.
What does HUB x HUB x HUB mean?
It means all three connection openings use receiving hub connections for compatible PVC DWV piping.
What is the side inlet used for?
The side inlet provides an additional connection point for compatible branch piping.
Does this fitting combine a bend and branch connection?
Yes. The fitting integrates the directional bend and side inlet within one molded body.
How many piping connections does it have?
The fitting has three hub connections: two for the main bend and one for the side inlet.
What should I confirm before ordering?
Confirm all required sizes, HUB x HUB x HUB configuration, bend orientation, side inlet position, and PVC DWV compatibility.
Important Ordering & Installation Notes
- Confirm all required nominal sizes.
- Verify all three hub connections.
- Inspect each hub opening before use.
- Confirm the required bend orientation.
- Verify the required side inlet position.
