Lesso America
PVC DWV 1/4 Bend w/Low Heel Inlet (HUB x HUB x HUB)
- SKU:
- LP303
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
PVC DWV 1/4 Bend w/Low Heel Inlet (HUB x HUB x HUB)
PVC DWV 1/4 Bend w/Low Heel Inlet (HUB x HUB x HUB) provides a directional change with an additional low heel branch connection within compatible PVC drainage, waste, and vent piping systems. The fitting combines three receiving hub connections within one molded quarter-bend body.
The HUB x HUB x HUB configuration provides two primary hub connections for the bend and a third hub at the low heel inlet. This arrangement allows the piping run to change direction while incorporating an additional branch connection at the heel of the fitting.
Product Highlights
- PVC construction
- DWV bend design
- Three hub connections
- Low heel inlet configuration
- HUB x HUB x HUB connection style
- Changes the primary piping direction
- Provides an additional heel branch connection
- Combines a quarter bend and low heel inlet in one fitting
Technical Specifications
| Product Type | 1/4 Bend with Low Heel Inlet |
|---|---|
| Manufacturer | LESSO America |
| Material | PVC |
| Product Series | PVC DWV Fittings |
| Connection | Hub x Hub x Hub |
| Connection Abbreviation | HUB x HUB x HUB |
| Number of Connections | 3 |
| Configuration | Quarter Bend with Low Heel Inlet |
| Primary Function | Provide a Directional Change with a Low Heel Branch Connection |
Connection Configuration
The first receiving hub accepts appropriately sized compatible PVC DWV pipe and forms one side of the primary bend connection.
The second receiving hub continues the primary piping path through the quarter-bend body.
The third receiving hub provides an additional branch connection at the low heel of the fitting.
Low Heel Inlet Design
The 1/4 bend with low heel inlet combines a directional change with an additional branch connection in one molded PVC fitting.
The two primary hubs create the bend in the piping run, while the third hub provides the low heel inlet connection.
Integrating the bend and low heel branch into one fitting can simplify compatible DWV layouts that require both functions at the same location.
Why Choose a PVC DWV 1/4 Bend with Low Heel Inlet?
- Three-way fitting
- Two main hubs
- Changes piping direction
- Compact molded body
- Supports DWV routing
- Third hub connection
- Low heel position
- Creates a branch point
- Compatible DWV use
- Reduces separate branch fittings
Typical Applications
- Drain piping
- Waste piping
- Vent systems
- Residential DWV layouts
- Commercial DWV installations
- Branch piping
- Drain transitions
- Waste piping layouts
- Multi-connection layouts
- Low heel inlet applications
Standards & Compliance
- PVC DWV System Compatibility – Select the fitting according to the requirements of the adjoining drainage, waste, and vent piping system.
- Manufacturer Documentation – Confirm applicable dimensions, standards, certifications, listings, and connection requirements using current LESSO technical literature.
- Project Requirements – Verify applicable plumbing, DWV, heel-inlet, branch-connection, and local authority requirements before installation.
Requirements can vary according to fitting size, heel inlet configuration, installation orientation, adjoining piping, and the complete DWV system.
Refer to the Lesso Product Catalog and PVC Schedule 40 & DWV Technical Manual for current dimensional information, standards, certifications, listings, and technical requirements.
Construction Details
The fitting is manufactured from PVC and incorporates three receiving hub connections within a molded quarter-bend body.
The two primary hubs create the directional transition, while the third hub provides the low heel inlet connection.
The one-piece construction integrates the bend and branch connection into one compact PVC DWV fitting.
Installation & Selection Considerations
- Confirm all required connection sizes.
- Verify the HUB x HUB x HUB configuration.
- Check PVC DWV system compatibility.
- Confirm the required bend orientation.
- Verify the low heel inlet position.
Review the Lesso Product Catalog and PVC Schedule 40 & DWV Technical Manual for additional bend information, low heel inlet configurations, hub connection details, dimensions, standards, and technical guidance for compatible PVC DWV piping systems.
Need Help Selecting a PVC DWV 1/4 Bend with Low Heel Inlet?
Our GetPipe.com team can help review all required sizes, HUB x HUB x HUB configuration, bend orientation, low heel inlet position, adjoining DWV pipe, and system compatibility before you order.
Frequently Asked Questions
What is a PVC DWV 1/4 Bend with Low Heel Inlet used for?
It changes the direction of the main piping run while providing an additional branch connection at the low heel of the fitting.
What does HUB x HUB x HUB mean?
It means all three connection openings use receiving hub connections for compatible PVC DWV piping.
What is the low heel inlet used for?
The low heel inlet provides an additional connection point for appropriately sized compatible branch piping.
How many connections does this fitting have?
The fitting has three hub connections: two for the main bend and one for the low heel inlet.
Does the fitting combine a bend and branch connection?
Yes. Both functions are incorporated into the same molded PVC DWV fitting.
What should I confirm before ordering?
Confirm all required sizes, HUB x HUB x HUB configuration, bend orientation, low heel inlet position, and PVC DWV compatibility.
Important Ordering & Installation Notes
- Confirm all required nominal sizes.
- Verify all three hub connections.
- Inspect each connection before use.
- Confirm the required bend orientation.
- Verify the low heel inlet position.
