Milwaukee
Milwaukee Tool M18 FUEL 7-1/4" Dual Bevel Sliding Compound Miter Saw (Tool Only)
- SKU:
- MLW2733-20
- Availability:
- Usually Ships Same Day
- Weight:
- 35.75 LBS
Description
DUTY®
M18 FUEL 7-1/4-inch Sliding Miter Saw
M18 cordless system · Tool only · Battery and charger sold separately
Product Overview
This 7-1/4-inch M18 miter saw combines sliding travel and dual bevel for trim and framing cuts.
A shadow cut-line indicator helps position the work. The miter detent uses a cam-lock system.
- Dual bevelBevels in both directions.
- Sliding travelSupports wider crosscuts.
- Shadow lineLED cut-line indicator.
- Miter lockCam-locking detent system.
Technical Specifications
- Battery system
- M18
- Blade diameter
- 7-1/4 in
- Bevel design
- Dual bevel
- 90° crosscut
- 2 × 8 nominal lumber
- Vertical capacity
- 3-1/2 in
- Cut-line indicator
- Shadow LED
Choose the Correct Fit
Use a compatible 7-1/4 in miter-saw blade. Horizontal capacity: flat 2 × 8 nominal lumber at 90°; vertical: 3-1/2 in against the fence.
Capacities depend on cut angle and stock orientation. Support long stock, clamp the work as appropriate and check fence and guard clearance before powering the saw.
Installation & Care
Remove the battery before changing accessories, making adjustments or clearing debris. Inspect the tool and accessory before fitting the battery.
Clear chips from the table, fence and slide. With the battery out, check blade mounting and angles. Let the blade stop before lifting it from the cut.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help choosing a cordless cutting or finishing tool? Tell us your material, accessory and existing battery system.
Important Product Questions
Are a battery and charger included?
No. This is the exact tool-only model. Choose a compatible M18 battery and charger separately; accessory contents are not a battery kit.
Does dual bevel mean the work must be flipped?
Dual bevel allows bevel adjustment to either side. The work still needs correct support, fence clearance and clamping for the intended cut.
What should I check before use?
Confirm accessory fit, speed rating and condition for the task. Follow the tool instructions, secure the work and use the required guards and protective equipment.
