Milwaukee
Milwaukee Tool M18 FUEL 7-1/4" Dual Bevel Sliding Compound Miter Saw Kit
- SKU:
- MLW2733-21
- Availability:
- Usually Ships Same Day
- Weight:
- 20.00 LBS
Description
DUTY®
M18 FUEL 7-1/4-inch Sliding Miter Saw Kit
M18 cordless tool kit · 1 battery pack included · Exact power items listed below
Product Overview
This 7-1/4-inch M18 miter saw combines sliding travel and dual bevel for trim and framing cuts.
A shadow cut-line indicator helps position the work. The miter detent uses a cam-lock system.
- Dual bevelBevels in both directions.
- Sliding travelSupports wider crosscuts.
- Shadow lineLED cut-line indicator.
- Miter lockCam-locking detent system.
Technical Specifications
- Battery system
- M18
- Blade diameter
- 7-1/4 in
- Bevel design
- Dual bevel
- 90° crosscut
- 2 × 8 nominal lumber
- Vertical capacity
- 3-1/2 in
- Cut-line indicator
- Shadow LED
Choose the Correct Fit
Use a compatible 7-1/4 in miter-saw blade. Horizontal capacity: flat 2 × 8 nominal lumber at 90°; vertical: 3-1/2 in against the fence.
Capacities depend on cut angle and stock orientation. Support long stock, clamp the work as appropriate and check fence and guard clearance before powering the saw.
Installation & Care
Remove the battery before changing accessories, making adjustments or clearing debris. Inspect the tool and accessory before fitting the battery.
Clear chips from the table, fence and slide. With the battery out, check blade mounting and angles. Let the blade stop before lifting it from the cut.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help choosing a cordless tool kit? Share model 2733-21, your application and the accessories you need for the job.
Important Product Questions
Which batteries and charger are included?
This exact 2733-21 kit lists 1 × M18 REDLITHIUM XC5.0 5.0 Ah battery pack (48-11-1850); and 1 × M18 & M12 Multi-Voltage Charger (48-59-1812).
Which other package items are listed?
Along with the tool and power items above, the manufacturer lists 1 × Clamp; 1 × Carbide Tipped Blade; 1 × Blade Wrench. Match these supplied accessories to the intended work; broader tool capability does not add unlisted accessories.
Does dual bevel mean the work must be flipped?
Dual bevel allows bevel adjustment to either side. The work still needs correct support, fence clearance and clamping for the intended cut.
