Milwaukee
Milwaukee Tool 6T Kearney Crimping Jaw
- SKU:
- MLW49-16-KEAR
- Availability:
- Usually Ships Same Day
- Weight:
- 2.72 LBS
Description
DUTY®
Kearney
Crimping Jaw
A kearney crimping jaw with a verified 2977-20 service fit, starting serial L33A.
Product Overview
Use the prescribed Kearney Type O dies for the connector. Confirm the full crimping combination.
A quarter-turn retaining pin mounts the jaw. Separate push pins retain the removable dies.
- Force class6T utility-crimper jaw.
- Verified crimper2977-20, serial L33A.
- Die familyKearney Type O.
- Jaw retentionQuarter-turn locking pin.
Technical Specifications
- Force class
- 6T
- Crimper fit
- 2977-20
- Serial scope
- L33A
- Die family
- Kearney Type O
- Jaw retention
- 90° locking pin
- Die retention
- Push pins
Choose the Correct Fit
Identify the crimper and match the jaw, dies, connector and conductor against the applicable manufacturer chart. Do not select a combination by force class alone.
Remove the battery before changing the jaw. Align its center hole, fully insert and lock the retaining pin, and secure the locking thumb screw as instructed.
Installation & Care
Use the die-retaining pins to install the correct dies. Inspect the complete arrangement and follow the connector manufacturer’s crimp sequence.
Keep hands clear during operation and work on de-energized lines whenever possible. Inspect the jaw and dies for cracks or damage and remove damaged parts from service.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Send Willy the crimper, connector and required die reference to check the complete jaw arrangement.
Important Product Questions
Can I choose dies by wire size alone?
No. Use the approved connector, conductor and Kearney Type O die combination for this jaw. Verify it in the applicable chart before crimping.
What must I check after changing the jaw?
The retaining pin must be fully inserted and locked. Secure its locking thumb screw and confirm that the dies are correctly retained before operation.
Can this jaw cut cable as well?
This listing is for a crimping jaw. Use a separately specified cutting jaw for cable cutting.
