Milwaukee
Milwaukee Tool 38PC SAE Tap & Die PACKOUT Set w/ Hex-LOK 2-in-1 Handle
- SKU:
- MLW49-22-5604
- Availability:
- Usually Ships Same Day
- Weight:
- 5.85 LBS
Description
DUTY®
38-Piece SAE
Tap & Die Set
Cut and repair threads with Hex-LOK hand tooling organized in a compact PACKOUT case.
Product Overview
This SAE set has plug taps, hex dies and a thread gauge for brass, aluminum and mild steel.
The all-metal Hex-LOK handle swaps dies and the tap collet without tools; sizes are etched.
- Tap and die handleAccepts both cutters.
- Clear sizingLaser-etched sizes.
- Corrosion resistanceBlack oxide coating.
- PACKOUT caseRemovable storage tray.
Technical Specifications
- Thread system
- SAE
- Tap style
- Straight-flute plug
- Hex die size
- 1 in
- Coating
- Black oxide
- Handle
- Hex-LOK 2-in-1
- Cutting method
- Hand threading
Choose the Correct Fit
Match diameter and pitch to the thread before selecting a tap or die. Use the gauge to distinguish threads that look similar.
Use the correct pilot-hole diameter for a tap and start square to the workpiece. The plug taps are intended for through-hole threading.
Installation & Care
Turn the taps by hand with a suitable holder; do not drive them with a power tool. Use appropriate cutting fluid and clear chips as the thread develops.
Clean the cutters before returning them to the tray. Replace chipped tooling, and keep the case closed during transport.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Tell Willy the thread diameter, pitch and work material. We can help check the tap, die and holder selection for your repair.
Important Product Questions
Can I power these taps with a drill?
No. These are hand taps. The drill bits used to make pilot holes are a separate operation from turning the tap.
Will the handle work with standard hex dies?
The Hex-LOK handle accepts 1-inch hex dies and the Milwaukee tap collet. Confirm the die’s outside size as well as its thread.
What metals is the set intended for?
The taps and dies are intended for common metal applications including brass, aluminum and mild steel. Use cutting fluid suited to the material.
