Milwaukee
Milwaukee Tool 3" STANDARD SELFEED BIT, 1/2" SHANK
- SKU:
- MLW48-25-3001
- Availability:
- Usually Ships Same Day
- Weight:
- 5.00 LBS
Description
DUTY®
3 in Standard
Selfeed Wood Bit
Bore large wood openings with serviceable self-feeding cutters.
Product Overview
Milwaukee 48-25-3001 is a 3 in standard selfeed wood-boring bit with a 1/2 in hex shank. Two internal cutters remove material as the feed screw pulls the bit into the wood.
The cutters can be resharpened, and the feed screws and arbor are replaceable. Two feed screws are included. A rust inhibitor protects the bit during storage between drilling tasks.
- Self-feeding wood entryThe feed screw pulls the bit into the workpiece.
- Dual internal cuttersTwo cutting surfaces remove wood inside the hole.
- Serviceable cutting systemResharpen cutters and replace worn feed screws or arbor.
- Storage corrosion protectionA rust inhibitor helps protect the bit between uses.
Technical Specifications
- Model
- 48-25-3001
- Cutting diameter
- 3 in
- Shank
- 1/2 in hex
- Bit type
- Standard selfeed
- Work material
- Wood
- Cutter service
- Resharpenable
Choose the Correct Fit
Use a drill rated for this 3 in selfeed wood-boring bit and 1/2 in hex shank; the bit has two internal cutters.
Check the wood for hidden hardware and support it securely; the feed screw draws the bit into the wood during drilling.
Installation & Care
Disconnect the drill before installing the bit or servicing the cutters and feed screw. Follow the drill’s side-handle and torque-control instructions.
Remove chips and inspect the screw and cutters. Use the proper replacement parts and protect the cutting edges during storage.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help choosing this item? Share model 48-25-3001 and the tool, material or application you need to confirm.
Important Product Questions
What is included with the bit?
The bit is supplied with two feed screws.
Can its cutting edges be renewed?
Yes. The internal cutters can be resharpened, and the feed screws and arbor are replaceable.
Which material is it intended to bore?
This is a standard selfeed bit for wood, with a 3 in cutting diameter.
