Milwaukee
Milwaukee Tool 2" TCT Retractable Pilot Pin
- SKU:
- MLW49-59-0014
- Availability:
- Usually Ships Same Day
- Weight:
- 0.20 LBS
Description
DUTY®
2 in TCT
Pilot Pin
A retractable pilot pin for 3/4–2-1/4 in TCT cutters with 2 in depth of cut.
Product Overview
An extended pilot improves visibility of the point and aligns the annular cutter.
The spring-loaded pin retracts and assists plug ejection. Match cutter diameter and cut depth.
- Matched cutterTCT annular-cutter fit.
- Depth selection2 in cutting-depth family.
- Spring actionRetracts and aids plug ejection.
- Visible pointExtended alignment profile.
Technical Specifications
- Cutter diameter
- 3/4–2-1/4 in
- Cutter depth
- 2 in
- Cutter family
- TCT annular cutters
- Mechanism
- Spring loaded
- Pin profile
- Extended length
- Resharpening
- Not permitted
Choose the Correct Fit
Match the pilot to the cutter diameter range, TCT family and cutting depth. Similar-looking pilot pins are not necessarily interchangeable.
Remove power before fitting the cutter and pilot. Check that the spring-loaded pin travels freely and seats according to the cutter instructions.
Installation & Care
Align the visible point with the hole location before starting. Use the cutter’s recommended speed, feed and lubricant.
Keep clear of an ejected plug and let hot parts cool. Inspect the pin for bending or sticking; it is not intended to be resharpened.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Send Willy the annular-cutter part number, diameter and cutting depth to check the pilot-pin match.
Important Product Questions
Does the depth figure mean the pin’s physical length?
Here, 2 in identifies the compatible cutter’s depth of cut. Confirm the complete cutter and pilot combination.
What does the spring-loaded design do?
It allows retraction and assists with ejecting the cut plug.
Can I sharpen a worn pin?
No. It cannot be resharpened. Replace a damaged or worn pin with the correct part.
