Milwaukee
Milwaukee Tool 2-5/8" X 22" One Piece SDS-MAX Core Bit
- SKU:
- MLW48-20-5414
- Availability:
- Usually Ships Same Day
- Weight:
- 3.78 LBS
Description
DUTY®
SDS-Max One-Piece
Core Bit
Drill a 2-5/8 in masonry opening with this 22 in overall-length core bit for an SDS-Max rotary hammer.
Product Overview
This 2-5/8-inch carbide core cuts 3 inches deep; clear the center core for deeper drilling.
At 22 inches overall, this SDS-Max core has a thick-wall body and debris-clearing flutes.
- Alternating teethHelp break material faster.
- Fluted exteriorMoves debris from the kerf.
- One-piece buildTransfers hammer energy.
- Thick-wall bodyFor larger rotary hammers.
Technical Specifications
- Core diameter
- 2-5/8 in
- Overall length
- 22 in
- Drilling depth
- 3 in
- Shank
- SDS-Max
- Cutting material
- Carbide-tipped
- Body construction
- One-piece, thick wall
Choose the Correct Fit
Match the SDS-Max shank to the hammer and confirm its capacity for a 2-5/8 in core bit. Check the required sleeve or service clearance.
Allow for the 22 in overall length at the drilling position. Plan core removal for work deeper than the 3 in cutting depth.
Installation & Care
Isolate the hammer before assembly. Match the centering accessory to the retaining-ring design, then follow the core’s installation instructions.
Follow the matching centering kit’s release procedure. Let the core body cool, clear debris and inspect the teeth before storage.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help with a masonry opening? Send Willy the hole diameter, wall depth, hammer connection and the space available for the bit.
Important Product Questions
Does the overall length equal the drilling depth?
No. This bit is 22 in long overall but has a 3 in drilling depth. The inside core must be removed before drilling farther.
Can I keep drilling without clearing the center core?
No. This bit cuts the perimeter kerf. Stop and remove the inside core as directed before attempting deeper drilling.
Which centering bit fits this core?
Check the retaining-ring design. Milwaukee specifies 48-20-5498 for red-ring SDS-Max cores and 48-20-5495 for designs without a red ring; confirm the exact version before ordering.
