Milwaukee
Milwaukee Tool 4-5/8" STANDARD SELFEED BIT
- SKU:
- MLW48-25-4621
- Availability:
- Usually Ships Same Day
- Weight:
- 3.09 LBS
Description
DUTY®
4-5/8 in Selfeed
Wood Boring Bit
Bore 4-5/8 in wood openings for pipe and conduit with a resharpenable cutter and replaceable feed screw.
Product Overview
The 4-5/8 in cutter uses two inner blades to shave the hole wall as the feed screw pulls forward.
The rust-inhibiting finish protects between jobs. Restore the cutting edge by resharpening.
- Center feed screwPulls the bit into wood.
- Twin cutter bladesShave the hole radius.
- Replaceable arborRenew the drive connection.
- Renewable screwReplace the worn feed screw.
Technical Specifications
- Hole diameter
- 4-5/8 in
- Shank
- 3-flat
- Feed screw
- Removable, replaceable
- Cutting edge
- Resharpenable
- Finish
- Rust inhibitor
- Work material
- Wood
Choose the Correct Fit
Choose the opening from the pipe or conduit outside diameter and required clearance. Confirm the drill’s boring capacity.
Inspect the hole path for concealed services and metal. Secure the work and use the drill’s required support handle.
Installation & Care
Disconnect power before fitting or servicing the bit. Secure the three-flat shank and inspect the feed screw.
Control the self-feeding pull without forcing a dull cutter. Clean and dry the bit after use, then inspect the cutting edge.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need a 4-5/8 in wood opening? Tell Willy the pipe or conduit size, required clearance and drill model.
Important Product Questions
Can the cutting edge be sharpened?
Yes. This standard Selfeed bit has a resharpenable cutting edge. Preserve the original cutting geometry and follow the manufacturer’s service guidance.
Which wear parts can be replaced?
Milwaukee identifies both the feed screw and arbor as replaceable on this large Selfeed bit. Match replacements to this exact model before servicing.
Does nominal pipe size equal the hole diameter?
Not necessarily. Use the pipe or conduit’s actual outside diameter and required installation clearance to choose the hole size.
