Milwaukee
Milwaukee Tool 11/64" #8 Countersink Drill Bit
- SKU:
- MLW48-13-5001
- Availability:
- Usually Ships Same Day
- Weight:
- 0.08 LBS
Description
DUTY®
#8 Countersink
11/64 in Pilot Drill
Pair a #8 countersink with its 11/64 in pilot bit for one coordinated drilling setup.
Product Overview
The #8 countersink pairs with an 11/64 in pilot drill. Check the screw fit before cutting.
Adjustable drill length sets pilot depth. Make a trial hole to check the screw head’s seating.
- Combined operationDrill and countersink.
- Adjustable pilotSet the exposed drill length.
- Quick-change shank1/4 in quick-change hex.
- Depth adjustmentUse a 1/8 in hex key for setup.
Technical Specifications
- Countersink size
- #8
- Pilot diameter
- 11/64 in
- Shank
- 1/4 in quick-change hex
- Depth control
- Adjustable drill length
- Adjustment tool
- 1/8 in hex key
- Tool compatibility
- Drill/drivers
Choose the Correct Fit
Check the screw head and pilot-hole requirements before selecting the countersink size.
Isolate the drill before changing bits or adjusting the pilot length with a 1/8 in hex key.
Installation & Care
Clamp the work and make a test hole in scrap to confirm depth and screw-head seating.
Remove chips with the tool stopped. Inspect the pilot drill and countersink edges before storage.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help choosing a countersink? Tell Willy the screw size, head style and work material.
Important Product Questions
Which pilot drill comes with this countersink?
The #8 countersink uses a 11/64 in pilot drill. Confirm the screw and workpiece requirements before drilling.
How do I adjust the pilot depth?
Disconnect the drill, use a 1/8 in hex key to adjust the exposed bit length, then secure the adjustment before making a test hole.
Is the quarter-inch shank an impact rating?
No. The 1/4 in quick-change hex describes the connection. This countersink is specified for drill/drivers; do not assume impact-driver compatibility from shank shape.
