Milwaukee

Milwaukee Tool 1/4" Drive 4.5mm Socket

(No reviews yet) Write a Review
SKU:
MLW45-34-4001
Availability:
Usually Ships Same Day
Weight:
0.01 LBS
*Images are for visual reference only.
  • Milwaukee Tool 1/4" Drive 4.5mm Socket
  • Milwaukee Tool 1/4" Drive 4.5mm Socket
  • Milwaukee Tool 1/4" Drive 4.5mm Socket
  • Milwaukee Tool 1/4" Drive 4.5mm Socket
  • Milwaukee Tool 1/4" Drive 4.5mm Socket
  • Milwaukee Tool 1/4" Drive 4.5mm Socket
$5.49

Represents the combined quantity sold of all the sizes under this product SKU.
Sold:
Frequently bought together:

Description

Built for the TradesReady for What’s Next
Nothing butHEAVY
DUTY®
FOUR FLAT SOCKETS

4.5 mm Standard
6-Point Socket

A 4.5 mm standard-depth socket for matching metric fasteners, ready for a 1/4-inch drive hand-tool setup.

MODEL45-34-4001

Product Overview

The 4.5 mm opening fits matching metric hex fasteners; check that the socket seats fully.

Connect the 1/4-inch square drive to a hand ratchet or extension; check working clearance.

  • Anti-roll flatsHelps resist rolling.
  • Wrench-ready sidesWrench-compatible flats.
  • Readable sizingStamped size markings.
  • Fastener protectionAnti-rounding geometry.

Technical Specifications

Drive size
1/4 in
Socket size
4.5 mm
Fastener fit
6-point
Depth
Standard
Size marking
Stamped
Finish
Chrome

Choose the Correct Fit

Choose this 4.5 mm opening for the matching fastener size. Confirm a snug fit before applying force.

Use a 1/4-inch drive hand ratchet or suitable extension. Check that the socket is fully retained before starting.

Installation & Care

Check the clearance above and around the fastener. A standard socket keeps the setup compact where extra depth is unnecessary.

Keep the opening and square drive free of grit. Inspect for cracks or damaged corners and replace a worn socket before use.

Small Details. Big Jobsite Energy.

Get set. Stay focused. Make your next move count.

BRING ON
THE NEXT JOB.
Willy, GetPipe.com support mascot

Ask Willy:

Need help matching this socket? Tell Willy your fastener size, drive size and available clearance so the GetPipe team can check your selection.

Important Product Questions

Can I substitute a nearby SAE size?

Choose the exact fastener size and measurement system. A near match can leave play at the corners; stop if the socket rocks or fails to seat fully.

Can I turn it with a wrench?

Yes. FOUR FLAT sides are wrench-compatible. Choose a wrench that fits the outer flats securely; the fastener opening does not give that wrench size.

Is this the right depth for the job?

Use the standard format where it seats fully on the fastener with enough space for the ratchet. Choose a deep socket if the stud or recess requires more reach.

View AllClose

Reviews