Milwaukee

Milwaukee Tool 1/4" Drive 4.5mm Deep Socket

(No reviews yet) Write a Review
SKU:
MLW45-34-4011
Availability:
Usually Ships Same Day
Weight:
0.08 LBS
*Images are for visual reference only.
  • Milwaukee Tool 1/4" Drive 4.5mm Deep Socket
  • Milwaukee Tool 1/4" Drive 4.5mm Deep Socket
  • Milwaukee Tool 1/4" Drive 4.5mm Deep Socket
  • Milwaukee Tool 1/4" Drive 4.5mm Deep Socket
  • Milwaukee Tool 1/4" Drive 4.5mm Deep Socket
  • Milwaukee Tool 1/4" Drive 4.5mm Deep Socket
$6.99

Represents the combined quantity sold of all the sizes under this product SKU.
Sold:
Frequently bought together:

Description

Built for the TradesReady for What’s Next
Nothing butHEAVY
DUTY®
FOUR FLAT SOCKETS

4.5 mm Deep
6-Point Socket

A 4.5 mm deep socket for matching metric fasteners, ready for a 1/4-inch drive hand-tool setup.

MODEL45-34-4011

Product Overview

Match the 4.5 mm opening to the fastener; check clearance for the deep socket body.

Connect the 1/4-inch square drive to a hand ratchet or extension; check working clearance.

  • Anti-roll flatsHelps resist rolling.
  • Wrench-ready sidesWrench-compatible flats.
  • Readable sizingStamped size markings.
  • Fastener protectionAnti-rounding geometry.

Technical Specifications

Drive size
1/4 in
Socket size
4.5 mm
Fastener fit
6-point
Depth
Deep
Size marking
Stamped
Finish
Chrome

Choose the Correct Fit

Choose this 4.5 mm opening for the matching fastener size. Confirm a snug fit before applying force.

Use a 1/4-inch drive hand ratchet or suitable extension. Check that the socket is fully retained before starting.

Installation & Care

Check clearance around longer studs or recessed fasteners before choosing a deep socket. Confirm that it seats fully on the fastener.

Keep the opening and square drive free of grit. Inspect for cracks or damaged corners and replace a worn socket before use.

Small Details. Big Jobsite Energy.

Get set. Stay focused. Make your next move count.

BRING ON
THE NEXT JOB.
Willy, GetPipe.com support mascot

Ask Willy:

Need help matching this socket? Tell Willy your fastener size, drive size and available clearance so the GetPipe team can check your selection.

Important Product Questions

Can I substitute a nearby SAE size?

Choose the exact fastener size and measurement system. A near match can leave play at the corners; stop if the socket rocks or fails to seat fully.

Can I turn it with a wrench?

Yes. FOUR FLAT sides are wrench-compatible. Choose a wrench that fits the outer flats securely; the fastener opening does not give that wrench size.

Is this the right depth for the job?

Choose the deep format when you need room around a longer stud or a recessed fastener. Verify the actual working clearance before ordering.

View AllClose

Reviews