Empire Industries
Fig. 280S Adjustable Pipe Roll Stand
- SKU:
- 280S
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
Fig. 280S Adjustable Pipe Roll Stand
Empire Industries Fig. 280S Adjustable Pipe Roll Stand is designed to support pipe where longitudinal movement may occur due to expansion and contraction while vertical adjustment is required.
This listing is for the plain carbon steel Fig. 280S Adjustable Pipe Roll Stand. The assembly combines an adjustable steel stand with a cast iron pipe roller to provide support while allowing longitudinal pipe movement.
Product Highlights
- Adjustable pipe roll stand for supporting piping systems
- Plain carbon steel stand construction
- Cast iron roller
- Designed for longitudinal pipe movement due to expansion and contraction
- Provides vertical adjustment
- Available for multiple pipe sizes
- Specify figure number, finish, and roller size when ordering
Pipe Movement
The roller design supports the pipe while permitting longitudinal movement associated with expansion and contraction. This makes the Fig. 280S suitable for piping systems where movement must be accommodated at the support point.
Technical Specifications
| Manufacturer | Empire Industries |
|---|---|
| Figure | 280S |
| Product Type | Adjustable Pipe Roll Stand |
| Stand Material / Finish | Plain Carbon Steel |
| Roller Material | Cast Iron |
| Service | Designed for the support of pipe where longitudinal movement may occur due to expansion and contraction and where vertical adjustment is required |
| Ordering | Specify figure number, finish, and roller size |
Vertical Adjustment
The adjustable stand allows the supported pipe elevation to be set for the installation. Refer to the manufacturer submittal for the dimensions, adjustment range, roller size, and recommended load applicable to each pipe size.
Approvals & Standards
- Complies with Federal Specification WW-H-171-E (Type 47)
- Complies with A-A-1192A (Type 44)
- Complies with Manufacturers Standardization Society MSS SP-58 and SP-69 Type 44
Installation Notes
Stainless steel pipe roll hangers are recommended for applications where protection from a corrosive environment is required. Maximum recommended loads shown by the manufacturer are based on the applicable pipe size and support configuration. Consult the Fig. 280S submittal for dimensional and load information before installation.
Important Ordering Notes
This listing is for the plain carbon steel Fig. 280S Adjustable Pipe Roll Stand. Select the required size before ordering and verify the dimensions, roller size, adjustment requirements, and maximum recommended load using the manufacturer submittal.
Product Documents
Product Questions
What is the Fig. 280S Adjustable Pipe Roll Stand designed for?
It is designed to support pipe where longitudinal movement may occur due to expansion and contraction and where vertical adjustment is required.
What material is this Fig. 280S Pipe Roll Stand?
This listing is for the plain carbon steel version. The pipe roller is cast iron.
Does the Fig. 280S allow the pipe to move?
Yes. The roller is designed to accommodate longitudinal pipe movement associated with expansion and contraction.
Is the support height adjustable?
Yes. The Fig. 280S provides vertical adjustment. Refer to the manufacturer submittal for the applicable dimensional range for the selected size.
What information should be specified when ordering?
Specify the figure number, finish, and roller size when ordering.
Where can I find the dimensions and maximum recommended load?
The Empire Fig. 280S submittal provides dimensions, weights, and maximum recommended loads by pipe size.
Ask Willy: Product Information & Help
Contact the GetPipe.com team for help with Fig. 280S Adjustable Pipe Roll Stand.
