Merit Brass
Carbon Press Female Reducing Tees (P x FPT)
- SKU:
- MBCPRFT
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
CarbonPress® Carbon Steel Press Female Reducing Tee (P x FPT)
CarbonPress® Carbon Steel Press Female Reducing Tees provide a branch transition from a carbon steel press piping run to a female threaded connection. The configuration allows the main press-connected piping to continue through the tee while providing a reduced female threaded branch for connection to compatible male-threaded components.
CarbonPress® is a 1/2" through 2" carbon steel press fitting system suitable for use with black iron, epoxy-coated, and galvanized Schedule 10 through Schedule 40 carbon steel pipe. When pressed, an internal grab ring grips the outside diameter of the pipe while an elastomeric sealing element creates a leak-tight seal.
CarbonPress® fittings can be installed using Milwaukee or RIDGID press tools with the associated jaws or rings designed for carbon steel applications.
Product Highlights
- Carbon steel press female reducing tee
- Press-connected main run with female threaded branch
- Reduced branch configuration
- Provides a transition to compatible male-threaded components
- Part of the CarbonPress® carbon steel press fitting system
- Designed for 1/2" through 2" piping systems
- Suitable for black iron, epoxy-coated, and galvanized carbon steel pipe
- Compatible with Schedule 10 through Schedule 40 carbon steel pipe
- Grab ring mechanically secures the press connection to the pipe
- Elastomeric sealing element provides a leak-tight seal
- Leak Before Press (LBP) Technology
- EPDM and HNBR sealing options
- Compatible with Milwaukee or RIDGID press tools and associated carbon steel jaws/rings
- 15-year limited warranty
Technical Specifications
| Product Type | Female Reducing Tee |
|---|---|
| System | CarbonPress® |
| Run Connection | Press |
| Branch Connection | Female Thread |
| Configuration | Press Run x Female Threaded Reduced Branch |
| System Size Range | 1/2" - 2" |
| Compatible Pipe | Black Iron, Epoxy-Coated & Galvanized Carbon Steel Pipe |
| Compatible Pipe Schedules | Schedule 10 - Schedule 40 |
| Sealing Options | EPDM or HNBR |
| EPDM Temperature Range | -40°F to 300°F (-40°C to 148°C) |
| HNBR Temperature Range | -40°F to 200°F (-40°C to 93°C) |
| Press Technology | Leak Before Press (LBP) |
| Compatible Tool Brands | Milwaukee & RIDGID |
| EPDM Certification | IAPMO Z 1117 |
| HNBR Certification | IAPMO/ANSI LC 4 / CSA 6.32 |
| Warranty | 15-Year Limited Warranty |
CarbonPress® Connection Technology
When the press connections are installed, a grab ring deforms and its sharp edges grip the outside diameter of the pipe, securing the fitting axially and helping prevent movement.
At the same time, an elastomeric sealing element impinges on the pipe to create a leak-tight connection.
Female Reducing Tee Design
The female reducing tee allows the press-connected main piping run to continue through the fitting while providing a reduced female threaded branch. The threaded branch can connect to a compatible male-threaded valve, nipple, instrument connection, fitting, or equipment connection.
Leak Before Press Technology
CarbonPress® fittings incorporate Leak Before Press (LBP) Technology, helping identify connections that have not been properly pressed during system testing.
EPDM & HNBR Seal Options
- EPDM: -40°F to 300°F (-40°C to 148°C)
- HNBR: -40°F to 200°F (-40°C to 93°C)
Select the sealing element appropriate for the intended system and application.
Pipe Compatibility
CarbonPress® is suitable for use with:
- Black iron carbon steel pipe
- Epoxy-coated carbon steel pipe
- Galvanized carbon steel pipe
- Schedule 10 through Schedule 40 pipe
- Pipe sizes within the 1/2" through 2" CarbonPress® system
Press Tool Compatibility
CarbonPress® fittings can be pressed using Milwaukee or RIDGID tools with the associated jaws or rings intended for carbon steel press applications.
Applications
Press technology has a multi-decade history of successful use in applications including:
- Hydronic heating systems
- Fire sprinkler systems
- Fluid conveyance
- Gas conveyance
- Oil systems
- Low-pressure steam
Seal selection, threaded-component compatibility, and system requirements should be verified for the specific application.
Certifications & Warranty
- EPDM: IAPMO Z 1117
- HNBR: IAPMO/ANSI LC 4 / CSA 6.32
- Warranty: 15-Year Limited Warranty
Selection & Application Guidance
- Select the main run size to match the carbon steel piping system.
- Select the female threaded branch size to match the mating male-threaded component.
- Verify all press-connected pipe is within the supported Schedule 10 through Schedule 40 range.
- Confirm whether EPDM or HNBR is appropriate for the intended application.
- Verify temperature and media compatibility before installation.
- Use an appropriate thread sealant on the female threaded branch connection.
- Use compatible Milwaukee or RIDGID press tools with the appropriate carbon steel jaws or rings.
- Follow the applicable CarbonPress® installation requirements when preparing and pressing each connection.
Product Documents
CarbonPress® Dimensional Catalog
Review CarbonPress® fitting dimensions and additional technical information.
Press Fittings & Valves Catalog
Review additional Merit Brass press fitting, valve, and system information.
Need Help Selecting CarbonPress® Fittings?
Our industrial PVF specialists can help review your run size, female threaded branch size, pipe schedule, seal requirements, application, quantity, and press-tool compatibility before you order.
Frequently Asked Questions
What is a CarbonPress® female reducing tee used for?
It is used to create a female threaded branch connection from a CarbonPress® carbon steel piping run.
What type of branch connection does this tee have?
The branch connection is female threaded for connection to a compatible male-threaded component.
What connections are used on the main run?
The main run uses CarbonPress® press connections.
What pipe can CarbonPress® fittings be used with?
CarbonPress® is suitable for black iron, epoxy-coated, and galvanized Schedule 10 through Schedule 40 carbon steel pipe.
What sizes does the CarbonPress® system cover?
The CarbonPress® system covers sizes from 1/2" through 2".
What is the EPDM temperature range?
The EPDM temperature range is -40°F to 300°F (-40°C to 148°C).
What is the HNBR temperature range?
The HNBR temperature range is -40°F to 200°F (-40°C to 93°C).
Do CarbonPress® fittings have Leak Before Press technology?
Yes. CarbonPress® fittings incorporate Leak Before Press (LBP) Technology.
What press tools can be used with CarbonPress®?
CarbonPress® fittings can be pressed with Milwaukee or RIDGID tools and the associated jaws or rings for carbon steel applications.
What warranty is provided?
CarbonPress® fittings have a 15-year limited warranty.
Important Ordering Notes
- CarbonPress® carbon steel female reducing tee.
- Press-connected main run with female threaded branch.
- Reduced branch configuration.
- Designed for the 1/2" through 2" CarbonPress® system.
- Suitable for black iron, epoxy-coated, and galvanized pipe.
- Compatible with Schedule 10 through Schedule 40 carbon steel pipe.
- EPDM and HNBR sealing options have different temperature ratings and certifications.
- Leak Before Press (LBP) Technology.
- 15-year limited warranty.
- Confirm both main run size and female threaded branch size before ordering.
- Verify pipe schedule, seal material, and application requirements before installation.
