Merit Brass
Carbon Press Reducing Tees
- SKU:
- MBCPRT
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
CarbonPress® Carbon Steel Press Reducing Tee
CarbonPress® Carbon Steel Press Reducing Tees provide a three-way branch connection with a reduced branch size for compatible carbon steel piping systems. The reducing tee design allows the main run to continue through the fitting while transitioning to a smaller branch connection.
CarbonPress® is a 1/2" through 2" carbon steel press fitting system suitable for use with black iron, epoxy-coated, and galvanized Schedule 10 through Schedule 40 carbon steel pipe. When pressed, an internal grab ring grips the outside diameter of the pipe while an elastomeric sealing element creates a leak-tight seal.
CarbonPress® fittings can be installed using Milwaukee or RIDGID press tools with the associated jaws or rings designed for carbon steel applications.
Product Highlights
- Carbon steel press reducing tee
- Three-way branch fitting with reduced branch connection
- Press connections
- Designed to maintain the main run while reducing the branch size
- Part of the CarbonPress® carbon steel press fitting system
- Designed for 1/2" through 2" piping systems
- Suitable for black iron, epoxy-coated, and galvanized carbon steel pipe
- Compatible with Schedule 10 through Schedule 40 carbon steel pipe
- Grab ring mechanically secures the fitting to the pipe after pressing
- Elastomeric sealing element provides a leak-tight seal
- Leak Before Press (LBP) Technology
- EPDM and HNBR sealing options
- Compatible with Milwaukee or RIDGID press tools and associated carbon steel jaws/rings
- 15-year limited warranty
CarbonPress® Connection Technology
When the fitting is pressed, a grab ring deforms and its sharp edges grip the outside diameter of the pipe, securing the fitting axially and helping prevent movement.
At the same time, an elastomeric sealing element impinges on the pipe to create a leak-tight connection.
Reducing Tee Design
The reducing tee provides three press connection points, with the branch connection sized smaller than the main run. This allows the piping system to continue through the tee while creating a reduced 90° branch from the main line.
Leak Before Press Technology
CarbonPress® fittings incorporate Leak Before Press (LBP) Technology, helping identify connections that have not been properly pressed during system testing.
Technical Specifications
| Product Type | Reducing Tee |
|---|---|
| System | CarbonPress® |
| Connection Type | Press |
| Configuration | Three-Way Reducing Tee |
| Function | Main Run with Reduced Branch Connection |
| System Size Range | 1/2" - 2" |
| Compatible Pipe | Black Iron, Epoxy-Coated & Galvanized Carbon Steel Pipe |
| Compatible Pipe Schedules | Schedule 10 - Schedule 40 |
| Sealing Options | EPDM or HNBR |
| EPDM Temperature Range | -40°F to 300°F (-40°C to 148°C) |
| HNBR Temperature Range | -40°F to 200°F (-40°C to 93°C) |
| Press Technology | Leak Before Press (LBP) |
| Compatible Tool Brands | Milwaukee & RIDGID |
| EPDM Certification | IAPMO Z 1117 |
| HNBR Certification | IAPMO/ANSI LC 4 / CSA 6.32 |
| Warranty | 15-Year Limited Warranty |
EPDM & HNBR Seal Options
- EPDM: -40°F to 300°F (-40°C to 148°C)
- HNBR: -40°F to 200°F (-40°C to 93°C)
Select the sealing element appropriate for the intended system and application.
Pipe Compatibility
CarbonPress® is suitable for use with:
- Black iron carbon steel pipe
- Epoxy-coated carbon steel pipe
- Galvanized carbon steel pipe
- Schedule 10 through Schedule 40 pipe
- Pipe sizes within the 1/2" through 2" CarbonPress® system
Press Tool Compatibility
CarbonPress® fittings can be pressed using Milwaukee or RIDGID tools with the associated jaws or rings intended for carbon steel press applications.
Applications
Press technology has a multi-decade history of use in applications including:
- Hydronic heating systems
- Fire sprinkler systems
- Fluid conveyance
- Gas conveyance
- Oil systems
- Low-pressure steam
Seal selection and system requirements should be verified for the specific application.
Certifications & Warranty
- EPDM: IAPMO Z 1117
- HNBR: IAPMO/ANSI LC 4 / CSA 6.32
- Warranty: 15-Year Limited Warranty
Selection & Application Guidance
- Select the main run size and reduced branch size required for the piping layout.
- Verify all pipe sizes are within the supported CarbonPress® system range.
- Verify the pipe is within the supported Schedule 10 through Schedule 40 range.
- Confirm whether EPDM or HNBR is appropriate for the intended application.
- Verify temperature and media compatibility before installation.
- Use compatible Milwaukee or RIDGID press tools with the appropriate carbon steel jaws or rings.
- Follow the applicable CarbonPress® installation requirements when preparing and pressing each connection.
Important Ordering Notes
- CarbonPress® carbon steel press reducing tee.
- Three-way configuration with reduced branch connection.
- Designed for the 1/2" through 2" CarbonPress® system.
- Suitable for black iron, epoxy-coated, and galvanized pipe.
- Compatible with Schedule 10 through Schedule 40 carbon steel pipe.
- EPDM and HNBR sealing options have different temperature ratings and certifications.
- Leak Before Press (LBP) Technology.
- 15-year limited warranty.
- Confirm both main run size and reduced branch size before ordering.
- Verify pipe schedule, seal material, and application requirements before installation.
Product Documents
Frequently Asked Questions
What is a CarbonPress® reducing tee used for?
It is used to create a reduced 90° branch from a larger carbon steel piping run.
How is a reducing tee different from a standard tee?
A standard tee uses the same nominal size through the run and branch, while a reducing tee provides a smaller branch connection.
What pipe can CarbonPress® fittings be used with?
CarbonPress® is suitable for black iron, epoxy-coated, and galvanized Schedule 10 through Schedule 40 carbon steel pipe.
What sizes does the CarbonPress® system cover?
The CarbonPress® system covers sizes from 1/2" through 2".
What is the EPDM temperature range?
The EPDM temperature range is -40°F to 300°F (-40°C to 148°C).
What is the HNBR temperature range?
The HNBR temperature range is -40°F to 200°F (-40°C to 93°C).
Do CarbonPress® fittings have Leak Before Press technology?
Yes. CarbonPress® fittings incorporate Leak Before Press (LBP) Technology.
What press tools can be used with CarbonPress®?
CarbonPress® fittings can be pressed with Milwaukee or RIDGID tools and the associated jaws or rings for carbon steel applications.
What warranty is provided?
CarbonPress® fittings have a 15-year limited warranty.
Ask Willy: Product Selection & Support
Our GetPipe.com team can help review sizing, material, connection requirements, and product information before you order.
