B54G-P600 - In-Line Sight Glass Replacement Glass

Product Highlights

• Genuine Dixon replacement component
• Manufacturer part number B54G-P600
• 6" sight glass replacement insert
• Borosilicate glass construction
• Designed for compatible Dixon B54BMP-series in-line sight glasses
• Transparent viewing section for visual process monitoring
• Direct borosilicate glass replacement option for the 6" assembly
• Published weight: 2.6 lb
• Polycarbonate alternative: B54BMP-LX600
• Replacement glass only; not a complete sight glass assembly

The B54G-P600 is the borosilicate glass insert used as the transparent viewing section in compatible 6" Dixon B54BMP-series in-line sight glass assemblies.

It is intended as a replacement component when the existing glass insert requires replacement because of damage, wear, maintenance, or scheduled servicing.

This part is the glass insert only and should not be confused with the complete in-line sight glass assembly.

B54G-P600 is manufactured from borosilicate glass. Borosilicate glass is commonly used in process viewing applications because of its transparency and resistance to thermal and chemical conditions encountered in compatible process systems.

The clear viewing section allows operators to visually inspect flow and process conditions while the sight glass is installed in the piping system.

Compatibility should always be confirmed for the actual process media, operating temperature, pressure, cleaning chemistry, sanitation procedures, and operating environment.

Before ordering B54G-P600, confirm that the existing assembly is the compatible 6" Dixon B54BMP-series in-line sight glass and that a borosilicate glass insert is required.

Dixon uses different replacement glass part numbers for each sight glass size. B54G-P600 is specifically identified for the 6" configuration and should not be selected solely by comparing the physical appearance of the existing insert.

Also inspect the seals and other assembly components during service. Replacement seal kits are available separately in different elastomer materials for compatible 6" B54BMP assemblies.

Before servicing the sight glass, fully isolate the process line and confirm that the system has been safely depressurized, drained, and brought to a safe temperature according to applicable facility procedures.

Inspect the replacement glass before installation. Do not install glass with chips, cracks, scratches, impact damage, or other defects that could affect safe operation.

Inspect mating components and seals during disassembly and replace worn or damaged components as required. Use only gasket materials compatible with the process media, temperature, cleaning chemicals, and operating conditions.

During reassembly, ensure the glass and sealing components are properly positioned and avoid uneven mechanical loading on the glass. Follow the applicable Dixon installation and maintenance instructions for the complete sight glass assembly.

After reassembly, inspect the installation and verify leak-free operation under appropriate conditions before returning the process line to normal service.