Charman Inc.
3/8" OD Yellow Coated Gas Connector with Straight Ball Valve - 1/2" FIP x 1/2" FIP
- Availability:
- Usually in Stock – Ships Quickly
- Weight:
- 0.00 LBS
Description
3/8" OD Yellow Coated Gas Connector with Straight Ball Valve - 1/2" FIP x 1/2" FIP
Charman Inc 3/8" OD Yellow Coated Gas Connectors with Straight Ball Valve provide a flexible connection for compatible gas-fired appliances and equipment while incorporating a convenient shutoff valve. This configuration features a 1/2" FIP connection on one end and a 1/2" FIP straight ball valve connection on the other.
The flexible corrugated connector construction helps accommodate routing between fixed gas piping and compatible equipment. Both ends use 1/2" female pipe connections, while the integrated straight ball valve provides an accessible shutoff point as part of the connector assembly.
Product Highlights
- Charman Inc yellow coated gas connector
- 3/8" outside diameter
- 1/2" FIP x 1/2" FIP connection configuration
- Integrated straight ball valve
- Female threaded connections on both ends
- Flexible corrugated connector construction
- Yellow exterior coating
- Available in lengths from 12" through 72"
- Multiple lengths for different installation layouts
- Designed for compatible gas appliance and equipment connections
Technical Specifications
| Product Type | Yellow Coated Gas Connector with Straight Ball Valve |
|---|---|
| Brand | Charman Inc |
| Product Family | 800-38-C7 |
| Connector OD | 3/8" |
| Connection 1 | 1/2" FIP |
| Connection 2 | 1/2" FIP Straight Ball Valve |
| Connection Configuration | 1/2" Female Iron Pipe x 1/2" Female Iron Pipe Straight Ball Valve |
| Valve Style | Straight Ball Valve |
| Construction | Flexible Corrugated Gas Connector |
| Exterior | Yellow Coated |
| Available Lengths | 12", 18", 24", 30", 36", 48", 60" and 72" |
| Primary Application | Flexible Gas Appliance and Equipment Connections with Integrated Shutoff |
Understanding the Connection Configuration
This connector has a 1/2" FIP connection on one end and a 1/2" FIP straight ball valve connection on the other. FIP identifies a female threaded pipe connection, so both ends are designed to connect to compatible 1/2" male threaded connections.
The integrated straight ball valve provides a shutoff point while maintaining the 1/2" female threaded connection at the valve end.
Flexible Connection with Integrated Shutoff
Flexible Installation
- Accommodates practical routing between fixed connection points
- Useful where rigid piping alignment is difficult
- Provides flexibility between gas piping and connected equipment
- Multiple lengths accommodate different installation layouts
- Helps simplify final appliance and equipment connections
Straight Ball Valve
- Integrated straight ball valve configuration
- Provides an accessible gas shutoff point
- 1/2" FIP valve-side connection
- 1/2" FIP connection on the opposite end
- Combines flexible connection and shutoff functionality
Choosing the Correct Length
Measure the distance and planned routing between the gas supply and appliance or equipment connection before selecting a connector. Choose a length that provides adequate routing without requiring the connector to be stretched or placed under unnecessary tension.
Available lengths range from 12" through 72". Avoid excessive slack, sharp bends, kinks, twisting, crushing, or other conditions that could damage the connector.
Available Connector Lengths
The 800-38-C7 connector family is available in eight lengths while maintaining the same 3/8" OD, 1/2" FIP x 1/2" FIP connection configuration, and straight ball valve design.
- 12"
- 18"
- 24"
- 30"
- 36"
- 48"
- 60"
- 72"
Common Applications
Gas-Fired Equipment
- Compatible gas appliances
- Commercial cooking equipment
- Heating equipment
- Mechanical equipment
- Other compatible gas-fired equipment
Installation & Replacement
- New equipment installations
- Replacement gas connector applications
- Maintenance projects
- Equipment connection updates
- Applications requiring an integrated straight shutoff valve
Ask Willy: Need Gas Connector Help?
Review the Yellow Coated Gas Connector specification sheet for product information, or use the complete Charman Inc connector catalog to compare available connector diameters, connection configurations, valve options, and lengths before ordering.
Installation & Selection Guidance
- Confirm that a 3/8" OD gas connector is appropriate for the intended installation.
- Confirm that both required threaded connections are 1/2" FIP.
- Verify that each FIP end mates with a compatible 1/2" male threaded connection.
- Confirm the straight ball valve will remain accessible after installation.
- Select a connector length appropriate for the actual installation distance and routing.
- Do not stretch the connector to reach between connection points.
- Avoid sharp bends, kinks, crushing, twisting, or other connector damage.
- Inspect the connector, coating, valve, and end fittings before installation.
- Use connection and sealing practices appropriate for the gas piping system.
- Leak-test completed gas connections before placing equipment into service.
- Follow applicable fuel-gas codes, local requirements, equipment instructions, and connector documentation.
- Installation should be completed by qualified personnel familiar with gas piping systems.
Product Selection Considerations
Connection Type
This family is configured with 1/2" FIP connections at both ends, with a straight ball valve incorporated into one end. Confirm that both mating connections are compatible 1/2" male threaded connections.
Connector Length
Select from 12", 18", 24", 30", 36", 48", 60", or 72" according to the required installation distance and routing.
Need Help Selecting a Gas Connector?
Our PVF specialists can help review your connector diameter, connection requirements, straight ball valve configuration, required length, equipment, and installation conditions before you order.
Frequently Asked Questions
What size is this gas connector?
This connector family has a 3/8" outside diameter with 1/2" FIP female threaded connections on both ends.
Does this connector include a ball valve?
Yes. This configuration includes a straight ball valve at one end of the connector.
What connections does this connector have?
It has a 1/2" FIP connection on one end and a 1/2" FIP straight ball valve connection on the other.
What lengths are available?
This listing includes 12", 18", 24", 30", 36", 48", 60", and 72" lengths.
What does FIP mean?
FIP identifies a female threaded pipe connection. Both threaded ends of this connector are 1/2" FIP.
What mating connections are required?
Both 1/2" FIP connections are intended to mate with compatible 1/2" male threaded connections.
Should the ball valve remain accessible?
Yes. Position the valve so it remains accessible for normal operation and service.
How do I choose the correct connector length?
Measure the required connection distance and planned routing, then select a length that permits proper installation without stretching, kinking, twisting, or excessive slack.
Should gas connections be leak-tested after installation?
Yes. Completed gas connections should be leak-tested using an appropriate method before the connected equipment is placed into service.
Where can I compare other connector configurations?
Use the Charman Inc Yellow Coated Gas Connector catalog linked in the Willy section to compare other connector diameters, connection configurations, valve options, and lengths.
Important Ordering Notes
- This listing is for Charman Inc 3/8" OD yellow coated gas connectors with straight ball valve.
- Connection configuration is 1/2" FIP x 1/2" FIP straight ball valve.
- Both connector ends use female threaded connections.
- Both threaded connections are 1/2" nominal size.
- Select the required connector length from the available options.
- Available lengths are 12", 18", 24", 30", 36", 48", 60", and 72".
- Confirm both mating connection types before ordering.
- Confirm the ball valve will remain accessible after installation.
- Confirm connector routing and required installation length before ordering.
- Do not install a connector that is kinked, twisted, crushed, or otherwise damaged.
- Review the linked Charman Inc specification sheet and connector catalog for additional product information.
- Installation should comply with applicable fuel-gas codes, equipment requirements, and local regulations.
- Gas connections should be installed and tested by qualified personnel.
