Charman Inc.
1/2" OD Yellow Coated Gas Connector with Straight Ball Valve - 1/2" FIP x 1/2" FIP
- Availability:
- Usually in Stock – Ships Quickly
- Weight:
- 0.00 LBS
Description
1/2" OD Yellow Coated Gas Connector with Straight Ball Valve - 1/2" FIP x 1/2" FIP
Charman Inc 1/2" OD Yellow Coated Gas Connectors with Straight Ball Valve provide a flexible gas connection with an integrated shutoff valve configuration. This family features 1/2" FIP connections on both ends, with a straight ball valve incorporated at one end, and is available in lengths from 12" through 72" for different installation layouts.
The flexible corrugated connector construction helps accommodate routing between fixed gas piping and compatible equipment where rigid-pipe alignment may be impractical. Female threaded connections on both ends are designed for compatible 1/2" male threaded connection points, while the straight ball valve provides an accessible gas shutoff point.
Product Highlights
- Charman Inc yellow coated gas connector
- 1/2" outside diameter
- 1/2" FIP x 1/2" FIP connection configuration
- Female threaded connections on both ends
- Integrated straight ball valve
- Flexible corrugated connector construction
- Yellow exterior coating
- Available in lengths from 12" through 72"
- Multiple lengths for different installation layouts
- Designed for compatible gas appliance and equipment connections
Technical Specifications
| Product Type | Yellow Coated Gas Connector with Straight Ball Valve |
|---|---|
| Brand | Charman Inc |
| Product Family | 800-12-B6 |
| Connector OD | 1/2" |
| Connection 1 | 1/2" FIP |
| Connection 2 | 1/2" FIP Straight Ball Valve |
| Connection Configuration | 1/2" Female Iron Pipe x 1/2" Female Iron Pipe Straight Ball Valve |
| Valve Style | Straight Ball Valve |
| Construction | Flexible Corrugated Gas Connector |
| Exterior | Yellow Coated |
| Available Lengths | 12", 18", 24", 30", 36", 48", 60" and 72" |
| Primary Application | Flexible Gas Appliance and Equipment Connections with Integrated Shutoff |
Understanding the Connection Configuration
This connector has 1/2" FIP connections on both ends, with a straight ball valve incorporated at one end. FIP identifies a female threaded pipe connection, so both ends are designed to mate with compatible 1/2" male threaded components.
Because both ends use the same nominal pipe size, this configuration provides an equal female-to-female connection while adding an integrated straight shutoff valve.
Why Choose a Connector with a Straight Ball Valve?
Flexible Installation
- Accommodates practical routing between fixed connection points
- Useful where rigid piping alignment is difficult
- Provides flexibility between gas piping and connected equipment
- Multiple lengths accommodate different installation layouts
- Helps simplify final appliance and equipment connections
Integrated Shutoff
- Includes a straight ball valve
- Provides an accessible shutoff point within the connection assembly
- 1/2" FIP connection on both ends
- Designed for compatible male threaded connections
- Combines flexible connection and shutoff functionality
Choosing the Correct Length
Measure the distance and planned routing between the gas supply and appliance or equipment connection before selecting a connector. Choose a length that provides adequate routing without requiring the connector to be stretched or placed under unnecessary tension.
Available lengths range from 12" through 72". Avoid excessive slack, sharp bends, kinks, twisting, crushing, or other conditions that could damage the connector.
Common Applications
Gas-Fired Equipment
- Compatible gas appliances
- Commercial cooking equipment
- Heating equipment
- Mechanical equipment
- Other compatible gas-fired equipment
Installation & Replacement
- New equipment installations
- Replacement gas connector applications
- Maintenance projects
- Equipment connection updates
- Applications benefiting from an integrated straight shutoff valve
Available Connector Lengths
The 800-12-B6 connector family is available in eight lengths while maintaining the same 1/2" OD, 1/2" FIP x 1/2" FIP connection configuration, and straight ball valve design.
- 12"
- 18"
- 24"
- 30"
- 36"
- 48"
- 60"
- 72"
Female x Female Valve Connection
The 1/2" FIP x 1/2" FIP configuration provides female threaded connections on both ends. The straight ball valve is incorporated at one end to provide an integrated shutoff point without changing the nominal connection size.
Confirm both mating male thread sizes, valve accessibility, and installation orientation before ordering.
Ask Willy: Need Gas Connector Help?
Review the Yellow Coated Gas Connector specification sheet for product information, or use the complete Charman Inc connector catalog to compare available connector diameters, connection configurations, valve options, and lengths before ordering.
Installation & Selection Guidance
- Confirm that a 1/2" OD gas connector is appropriate for the intended installation.
- Confirm the required connection configuration is 1/2" FIP x 1/2" FIP with straight ball valve.
- Verify that both FIP connections mate with compatible 1/2" male threaded connections.
- Confirm the straight ball valve will remain accessible after installation.
- Select a connector length appropriate for the actual installation distance and routing.
- Do not stretch the connector to reach between connection points.
- Avoid sharp bends, kinks, crushing, twisting, or other connector damage.
- Route the connector so it is protected from physical damage.
- Inspect the connector, coating, valve, and end fittings before installation.
- Use connection and sealing practices appropriate for the gas piping system.
- Leak-test completed gas connections before placing equipment into service.
- Follow applicable fuel-gas codes, local requirements, equipment instructions, and connector documentation.
- Installation should be completed by qualified personnel familiar with gas piping systems.
Product Selection Considerations
Connection & Valve Configuration
This family uses 1/2" FIP connections at both ends, with a straight ball valve incorporated at one end. Confirm that both mating components provide compatible 1/2" male threaded connections.
Connector Length
Select from 12", 18", 24", 30", 36", 48", 60", or 72" according to the required installation distance and routing.
Need Help Selecting a Gas Connector?
Our PVF specialists can help review your connector diameter, FIP requirements, straight ball valve configuration, required length, and installation conditions before you order.
Frequently Asked Questions
What size is this gas connector?
This connector family has a 1/2" outside diameter with 1/2" FIP female threaded connections on both ends.
What connections does this connector have?
It has 1/2" FIP female threaded connections on both ends, with a straight ball valve incorporated at one end.
Does this connector include a shutoff valve?
Yes. This connector configuration includes a straight ball valve at one of the 1/2" FIP connections.
What lengths are available?
This listing includes 12", 18", 24", 30", 36", 48", 60", and 72" lengths.
What does FIP mean?
FIP identifies a female threaded pipe connection. Both ends of this connector use 1/2" FIP connections.
Are both threaded connections the same size?
Yes. Both connections are 1/2" FIP.
What mating connections are required?
Both 1/2" FIP connections require compatible 1/2" male threaded connections.
How do I choose the correct connector length?
Measure the required connection distance and planned routing, then select a length that allows proper installation without stretching, kinking, twisting, or excessive slack.
Should the ball valve remain accessible?
Yes. Position the valve so it remains accessible for normal operation and service.
Should gas connections be leak-tested after installation?
Yes. Completed gas connections should be leak-tested using an appropriate method before the connected equipment is placed into service.
Important Ordering Notes
- This listing is for Charman Inc 1/2" OD yellow coated gas connectors with straight ball valve.
- Connection configuration is 1/2" FIP x 1/2" FIP straight ball valve.
- Both connector ends are female threaded connections.
- Both threaded connections are 1/2" nominal size.
- The straight ball valve is incorporated at one of the 1/2" FIP connections.
- Select the required connector length from the available options.
- Available lengths are 12", 18", 24", 30", 36", 48", 60", and 72".
- Confirm both mating male thread connections before ordering.
- Confirm the valve will remain accessible after installation.
- Confirm connector routing and required installation length before ordering.
- Do not install a connector that is kinked, twisted, crushed, or otherwise damaged.
- Review the linked Charman Inc specification sheet and connector catalog for additional product information.
- Installation should comply with applicable fuel-gas codes, equipment requirements, and local regulations.
- Gas connections should be installed and tested by qualified personnel.
