Merit Brass
125# Lead Free Brass Reducing Tee
- SKU:
- XNL106R
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
- Sizing Reads:
- End x End x Middle
Description
125# Lead Free Brass Reducing Tee
125# Lead Free Brass Reducing Tees are threaded fittings designed to create a 90-degree branch connection while transitioning between different nominal pipe sizes. The reducing tee configuration allows a main piping run to continue straight while providing a reduced branch connection for secondary piping, valves, fixtures, or equipment.
These fittings conform with the lead-content requirements for lead-free plumbing as defined by the U.S. Safe Drinking Water Act and are certified to contain ≤0.25 weighted average % lead. Manufacturer dimensional, certification, and material safety documentation is provided below.
Product Highlights
- 125# lead free brass reducing tee
- Creates a 90-degree branch connection
- Provides a size transition within the tee
- Three-way threaded fitting configuration
- Designed for compatible threaded plumbing and piping systems
- Lead free brass construction
- Conforms with lead-content requirements for lead-free plumbing under the U.S. Safe Drinking Water Act
- Certified ≤0.25 weighted average % lead
- Useful for reduced branch connections in compact piping layouts
- Manufacturer dimensional and certification documentation available
Technical Specifications
| Product Type | Reducing Tee |
|---|---|
| Pressure Class | 125# |
| Material | Lead Free Brass |
| Connection Type | Threaded |
| Configuration | Reducing Three-Way Tee |
| Branch Angle | 90° |
| Lead Content | ≤0.25 Weighted Average % Lead |
| Compliance | Conforms with Lead Content Requirements for Lead Free Plumbing as Defined by the U.S. Safe Drinking Water Act |
| Primary Function | Creating a 90-Degree Branch While Transitioning Pipe Size |
Reducing Tee Construction
A reducing tee creates a three-way piping junction with a branch positioned at 90 degrees to the main run while incorporating a size reduction at one of the connections.
This configuration allows the piping system to transition between nominal sizes within the tee itself, helping reduce the need for a separate reducer or bushing at the branch connection.
Lead free brass construction makes this fitting suitable for applications requiring compliance with applicable lead-content requirements for plumbing products.
Why Choose a Lead Free Brass Reducing Tee?
Branch & Size Reduction
- Creates a 90-degree branch connection
- Provides a size transition within one fitting
- Can reduce the number of separate fittings required
- Useful for smaller branch lines off a larger run
- Helps simplify compact piping layouts
Lead Free Brass Construction
- Certified ≤0.25 weighted average % lead
- Conforms with U.S. Safe Drinking Water Act lead-content requirements
- Provides corrosion resistance in compatible applications
- Suitable for applicable potable-water plumbing systems
- Manufacturer certification documentation available
Lead Free Compliance
The supplied product information states that these fittings conform with lead-content requirements for lead-free plumbing as defined by the U.S. Safe Drinking Water Act.
The fittings are also identified as being certified to contain ≤0.25 weighted average % lead. Review the manufacturer certification letter in the Product Documents section for additional certification information.
Reducing Tee vs. Standard Tee
Reducing Tee
- Includes different nominal connection sizes
- Creates a 90-degree branch
- Combines branching and size reduction
- Useful for smaller branch piping
- Can eliminate a separate reducing fitting
Standard Tee
- Typically uses matching nominal connection sizes
- Creates a 90-degree branch
- Does not provide an integral size reduction
- May require an additional reducer or bushing
- Used where pipe size remains consistent
Common Applications
Plumbing & Water Systems
- Potable-water piping where applicable
- Commercial plumbing systems
- Water distribution piping
- Reduced fixture branch connections
- General threaded brass piping assemblies
Commercial & General Service
- Mechanical piping installations
- Utility piping systems
- Valve and equipment branch connections
- Reduced secondary piping lines
- Three-way threaded piping junctions
Installation & Selection Guidance
- Confirm all nominal connection sizes before ordering.
- Verify which connection is reduced and confirm the required branch size.
- Verify thread compatibility with all mating piping components.
- Confirm the desired branch orientation before installation.
- Use an appropriate thread sealant suitable for the piping material, system media, pressure, and temperature.
- Apply thread sealant according to the sealant manufacturer's instructions.
- Avoid over-tightening threaded brass fittings.
- Confirm that the 125# fitting class is suitable for the intended piping system.
- Verify media, pressure, and temperature compatibility before installation.
- Confirm lead-free requirements for the specific plumbing application.
- Inspect all completed threaded connections for leaks before placing the system into service.
- Installation should comply with applicable plumbing codes and project requirements.
Product Documents
Import Brass Fitting Dimensions
Review manufacturer dimensional information for applicable lead free brass reducing tees and connection sizes.
Import Brass Fitting Certification Letter
Review the manufacturer certification documentation covering the lead free brass fitting product line.
Material Safety Data Sheet
Review the manufacturer material safety documentation for additional product and material information.
Need Help Selecting a Lead Free Brass Reducing Tee?
Our industrial PVF specialists can help review your run sizes, branch size, thread requirements, pressure class, application, and lead-free plumbing requirements before you order.
Frequently Asked Questions
What is a reducing tee used for?
A reducing tee is used to create a 90-degree branch while transitioning between different nominal pipe sizes within the same fitting.
How is a reducing tee different from a standard tee?
A reducing tee includes different nominal connection sizes, while a standard tee typically uses matching sizes on all three connections.
What pressure class is this fitting?
This fitting is identified as a 125# lead free brass reducing tee.
Is this fitting lead free?
Yes. The supplied product information states that it conforms with lead-content requirements for lead-free plumbing as defined by the U.S. Safe Drinking Water Act.
What is the certified lead content?
The fitting is identified as containing no more than 0.25 weighted average percent lead.
Why use a reducing tee instead of a standard tee and reducer?
A reducing tee combines the branch connection and size transition in one fitting, which can simplify the piping layout and reduce the number of separate threaded connections.
Can this fitting be used in potable-water systems?
The supplied product information states that the fitting conforms with U.S. Safe Drinking Water Act lead-content requirements for lead-free plumbing. Confirm all applicable local plumbing-code and system requirements before installation.
Where can I find fitting dimensions?
Use the Import Brass Fitting Dimensions document in the Product Documents section above.
Where can I verify the lead-free certification?
Use the Import Brass Fitting Certification Letter provided in the Product Documents section above.
Is material safety information available?
Yes. A manufacturer Material Safety Data Sheet is provided in the Product Documents section above.
Important Ordering Notes
- Product is a 125# lead free brass reducing tee.
- Designed to create a 90-degree branch while transitioning pipe size.
- Three-way threaded reducing configuration.
- Conforms with lead-content requirements for lead-free plumbing as defined by the U.S. Safe Drinking Water Act.
- Certified ≤0.25 weighted average % lead.
- Confirm all nominal connection sizes before ordering.
- Verify which connection is reduced and confirm the required branch size.
- Verify thread compatibility with all mating piping components.
- Confirm pressure, temperature, and media compatibility before use.
- Review applicable plumbing-code requirements for potable-water installations.
- Refer to the manufacturer dimensional, certification, and material safety documents for additional product information.
