Merit Brass
125# Leaded Brass Reducing Tee
- SKU:
- X106R
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
- Sizing Reads:
- End x End x Middle
Description
125# Leaded Brass Reducing Tee
125# Leaded Brass Reducing Tees are threaded fittings designed to connect three piping runs while transitioning between different nominal pipe sizes. The reducing tee configuration provides a 90-degree branch connection and allows a smaller or different-size branch to be incorporated directly into the fitting.
This product is identified as a 125# leaded brass fitting. Manufacturer dimensional, certification, and material safety documentation is provided below for reference.
Product Highlights
- 125# brass reducing tee
- Leaded brass construction
- Three-way threaded fitting
- Reducing branch configuration
- Provides a 90-degree branch connection
- Connects different nominal pipe sizes
- Combines branching and size reduction in one fitting
- Suitable for compatible plumbing and mechanical applications
- Manufacturer fitting dimensions available
- Manufacturer certification letter available
- Material Safety Data Sheet available
Technical Specifications
| Product Type | Reducing Tee |
|---|---|
| Pressure Class | 125# |
| Material | Brass |
| Lead Status | Leaded |
| Connection Type | Threaded |
| Configuration | Three-Way Reducing Tee |
| Branch Angle | 90° |
| Primary Function | Connecting Three Piping Runs While Transitioning Between Different Sizes |
| Product Documentation | Dimensions, Certification Letter, and SDS Available |
Reducing Tee Construction
A reducing tee provides three threaded connection points while incorporating different nominal connection sizes into the fitting. Two openings form the primary piping run, while the branch extends at 90 degrees.
The reducing configuration allows a smaller or different-size branch connection to be made without adding a separate reducing bushing or reducing coupling at the branch.
This can simplify piping layouts and reduce the number of individual threaded joints required.
Why Choose a Reducing Tee?
Branch & Size Transition
- Connects three piping sections
- Provides a 90-degree branch
- Allows different nominal connection sizes
- Combines branching and reduction in one fitting
- Useful in compact piping layouts
Threaded Brass Construction
- Brass fitting body
- Leaded material
- Threaded connection configuration
- Suitable for compatible piping applications
- Manufacturer documentation provided below
Reducing Tee vs. Standard Tee
Reducing Tee
- Uses different nominal sizes at one or more openings
- Provides a 90-degree branch connection
- Allows branch size reduction within the fitting
- May eliminate a separate reducing fitting
- This product configuration
Standard Tee
- Typically uses the same nominal size at each opening
- Provides a 90-degree branch
- Used for same-size branch connections
- Requires an additional reducer when a smaller branch is needed
- Different configuration from a reducing tee
Common Applications
Plumbing & Mechanical Piping
- Threaded piping systems
- Branch piping connections
- Pipe size transitions
- Distribution piping
- Fixture and equipment connections
Industrial & General Service
- Mechanical piping installations
- Equipment takeoff connections
- Maintenance and repair work
- Compatible process piping
- Applications requiring a reduced branch connection
Installation & Selection Guidance
- Confirm all required nominal connection sizes before ordering.
- Verify the run and branch size arrangement for the selected reducing tee.
- Confirm thread compatibility with all mating piping components.
- Verify that the reducing configuration matches the intended piping layout.
- Use an appropriate thread sealant for the system media, pressure, and temperature.
- Apply thread sealant according to the sealant manufacturer's instructions.
- Use appropriate wrenching surfaces during installation.
- Avoid over-tightening threaded fittings.
- Support connected piping as required to avoid excessive load on the tee.
- Confirm pressure, temperature, and media compatibility before use.
- Verify that leaded brass is permitted for the intended application.
- Installation should comply with applicable piping, plumbing, and project requirements.
Important Material Notice
- This product is identified as leaded brass.
- Confirm that leaded fittings are permitted for the intended application before installation.
- Do not assume this product meets lead-free potable-water requirements.
- Review the manufacturer certification and material safety documentation for additional information.
Product Documents
Import Brass Leaded Fitting Dimensions
Review manufacturer dimensional information for applicable leaded brass reducing tees and connection sizes.
Import Brass Leaded Fitting Certification Letter
Review manufacturer certification documentation for the import leaded brass fitting product line.
Material Safety Data Sheet
Review the supplied material safety documentation for the leaded brass fitting product line.
Need Help Selecting a 125# Leaded Brass Reducing Tee?
Our industrial PVF specialists can help review your run size, branch size, thread requirements, piping layout, and material requirements before you order.
Frequently Asked Questions
What is a reducing tee used for?
A reducing tee connects three piping sections while allowing one or more connections to use a different nominal pipe size.
How is a reducing tee different from a standard tee?
A standard tee typically uses the same nominal size at all three openings, while a reducing tee incorporates different connection sizes.
Can a reducing tee eliminate a separate reducer?
Yes. In compatible piping layouts, the reducing branch can eliminate the need to install a separate reducing fitting at the tee connection.
What angle is the branch connection?
The branch connection extends at 90 degrees from the main run.
What material is this fitting?
The supplied product information identifies this fitting as leaded brass.
What pressure class is this fitting?
The product is identified as a 125# fitting.
Is this fitting lead free?
No. The supplied product information identifies this fitting as leaded.
Where can I find fitting dimensions?
Use the Import Brass Leaded Fitting Dimensions document in the Product Documents section above.
Where can I find certification information?
Use the Import Brass Leaded Fitting Certification Letter in the Product Documents section above.
Is an SDS available?
Yes. A Material Safety Data Sheet is provided in the Product Documents section above.
Important Ordering Notes
- Product is a 125# leaded brass reducing tee.
- Three-way threaded reducing configuration.
- Provides a 90-degree branch connection.
- Allows different nominal connection sizes.
- Leaded brass construction.
- Confirm all run and branch sizes before ordering.
- Verify thread compatibility with all mating piping components.
- Confirm pressure, temperature, and media compatibility before use.
- Verify that leaded material is permitted for the intended application.
- Refer to the manufacturer dimensional, certification, and SDS documents for additional product information.
