Description
Schedule 80 CPVC Union 2000 (SOC) EPDM
Schedule 80 CPVC Union 2000 (SOC) EPDM provides a serviceable connection between compatible Schedule 80 CPVC piping using socket ends on both sides. The union configuration incorporates an EPDM sealing element and allows the piping connection to be separated without cutting the adjoining pipe.
The Schedule 80 CPVC Union 2000 combines two solvent-cement socket interfaces with a removable center union joint for convenient system access. Selection should account for nominal size, socket compatibility, EPDM seal compatibility, adjoining CPVC pipe, system conditions, and proper solvent-cement procedures.
Product Highlights
- CPVC construction
- Schedule 80 design
- Union 2000 configuration
- Socket end connections
- EPDM sealing element
- Serviceable union joint
- Designed for solvent-cement CPVC piping
- Allows disassembly without cutting adjoining piping
Technical Specifications
| Product Type | Union 2000 |
|---|---|
| Material | CPVC |
| Schedule | Schedule 80 |
| Configuration | Socket Union |
| Connection | Socket (SOC) x Socket (SOC) |
| Socket Interface | Compatible CPVC Pipe |
| Connection Count | Two End Connections |
| Seal Material | EPDM |
| Joining Method | CPVC Solvent-Cement Connections with Serviceable Union Joint |
| Primary Function | Provide a Serviceable Connection Between Compatible CPVC Piping |
Union 2000 Design
The Union 2000 design provides a removable center joint between two socket ends. This creates a convenient separation point within compatible Schedule 80 CPVC piping without requiring the adjoining pipe to be cut.
The fitting should be positioned where the center union joint remains accessible after installation. Proper alignment should be maintained so the union can be assembled and serviced without unnecessary mechanical stress.
Socket Connections
The socket connections accept appropriately sized compatible CPVC pipe on both ends of the union. These interfaces are designed for solvent-cement joining using suitable CPVC installation materials and procedures.
Pipe ends and fitting sockets should be clean and properly prepared before assembly. Compatible primer, solvent cement, insertion procedures, and required cure times should be followed for both connections.
EPDM Seal
The EPDM sealing element provides the seal at the removable center union joint. It should be properly positioned, clean, and free from visible damage before the union is assembled.
EPDM compatibility should be reviewed against the fluid and operating conditions of the intended system. Inspect the sealing element whenever the union is opened for service or maintenance.
Serviceable Socket Connection
A Schedule 80 CPVC Union 2000 SOC provides a service point in a solvent-cemented CPVC piping run. The center union joint can be separated while both socket ends remain permanently joined to the adjoining pipe.
System temperature, pressure, fluid compatibility, joining requirements, and applicable installation procedures should be reviewed for the intended application. Proper support should be maintained on both sides of the union.
Installation & Selection Considerations
- Confirm the nominal size.
- Verify both socket connections.
- Confirm EPDM seal compatibility.
- Provide access to the union joint.
- Maintain proper piping alignment.
Our piping specialists can help review nominal size, socket compatibility, EPDM seal requirements, adjoining CPVC pipe, service access, and installation considerations before you order.
Frequently Asked Questions
What is a Schedule 80 CPVC Union 2000 SOC used for?
It provides a serviceable connection between compatible CPVC pipes in a solvent-cemented piping run.
What does SOC mean?
SOC identifies a socket connection designed to accept compatible CPVC pipe for solvent-cement joining.
What type of seal does this union use?
This Union 2000 configuration uses an EPDM sealing element at the serviceable center joint.
Can the union be disconnected after installation?
Yes. The center union joint can be separated while both socket ends remain solvent cemented to the adjoining pipe.
How are the socket connections installed?
The socket ends are designed for compatible CPVC solvent-cement joining using appropriate preparation, joining materials, and cure procedures.
What should I confirm before ordering?
Confirm nominal size, socket configuration, EPDM compatibility, adjoining CPVC pipe sizing, and requirements of the intended piping system.
Important Ordering & Installation Notes
- Confirm the nominal size.
- Verify both socket connections.
- Confirm EPDM compatibility.
- Inspect the seal before assembly.
- Use compatible CPVC joining procedures.
