Spears
Schedule 80 CPVC One-Piece Flange (SOC) CL150 150PSI
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
Schedule 80 CPVC One-Piece Flange (SOC) CL150 150PSI
Schedule 80 CPVC One-Piece Flange (SOC) CL150 150PSI provides a bolted flange transition for compatible CPVC piping systems. The socket configuration allows the flange to join directly to compatible CPVC pipe while providing a Class 150 flange interface.
The Schedule 80 CPVC one-piece socket flange combines durable CPVC construction with a molded flange body and solvent-cement socket connection. Selection should account for nominal size, socket compatibility, Class 150 mating flange requirements, gasket selection, bolt alignment, 150 PSI rating, and proper CPVC joining procedures.
Product Highlights
- CPVC construction
- Schedule 80 design
- One-piece flange configuration
- Socket connection
- Class 150 flange interface
- 150 PSI rating
- Provides a detachable bolted connection
- Designed for compatible solvent-cement CPVC piping
Technical Specifications
| Product Type | One-Piece Flange |
|---|---|
| Material | CPVC |
| Schedule | Schedule 80 |
| Configuration | One-Piece Socket Flange |
| Connection | Socket (SOC) |
| Socket Interface | Compatible CPVC Pipe |
| Flange Class | Class 150 |
| Pressure Rating | 150 PSI |
| Joining Method | CPVC Solvent-Cement Connection x Bolted Flange Joint |
| Primary Function | Transition Compatible Schedule 80 CPVC Pipe to a Class 150 Flanged Connection |
One-Piece Flange Design
The one-piece flange design combines the CPVC hub and flange body into a single molded fitting. This configuration provides a direct transition between the socket connection and the Class 150 bolted flange interface.
The nominal size and mating flange requirements should be confirmed before ordering. Proper gasket selection, bolt-hole alignment, and flange-face positioning should also be established before final assembly.
Socket Connection
The socket connection is designed to accept appropriately sized compatible CPVC pipe. This interface creates the solvent-cement connection between the piping run and the one-piece flange.
Pipe ends and fitting sockets should be clean and properly prepared before assembly. Compatible CPVC primer, solvent cement, insertion procedures, and required cure times should be followed for the connection.
Class 150 Flange Connection
The Class 150 flange interface provides a detachable bolted connection to compatible flanged piping or equipment. The mating flange, gasket, and fasteners should be appropriate for the intended piping system.
Bolts should be tightened evenly using an appropriate cross-pattern sequence. Proper piping support and flange alignment should be maintained so the bolted joint is not used to correct piping misalignment.
Schedule 80 CPVC Application
A Schedule 80 CPVC One-Piece Socket Flange provides a molded transition from compatible CPVC piping to a Class 150 bolted flange connection. Its socket interface is intended for properly prepared solvent-cement joints using materials suitable for the CPVC piping system.
System temperature, pressure, fluid compatibility, gasket requirements, mating flange compatibility, joining requirements, and applicable installation standards should be reviewed for the intended application. This configuration is identified with a 150 PSI pressure rating.
Installation & Selection Considerations
- Confirm the nominal size.
- Verify the socket configuration.
- Confirm Class 150 flange compatibility.
- Check gasket and bolt requirements.
- Confirm the 150 PSI rating.
Our piping specialists can help review nominal size, socket configuration, Class 150 flange compatibility, gasket and bolt requirements, 150 PSI rating, and installation considerations before you order.
Frequently Asked Questions
What is a Schedule 80 CPVC One-Piece Socket Flange used for?
It provides a transition between compatible Schedule 80 CPVC pipe and a detachable Class 150 bolted flange connection.
What does SOC mean?
SOC identifies a socket connection designed to accept compatible CPVC pipe for solvent-cement joining.
What does CL150 mean?
CL150 identifies the flange as a Class 150 flange configuration for connection to compatible mating flanges.
What is the listed pressure rating?
This one-piece flange configuration is identified with a 150 PSI pressure rating.
How is the socket connection joined?
The socket is designed for compatible CPVC solvent-cement joining using appropriate pipe preparation, primer, solvent cement, insertion procedures, and cure requirements.
What should I confirm before ordering?
Confirm the nominal size, Schedule 80 CPVC material, socket configuration, Class 150 mating flange compatibility, gasket requirements, and 150 PSI rating.
Important Ordering & Installation Notes
- Confirm the nominal size.
- Verify the socket configuration.
- Confirm Class 150 flange compatibility.
- Check gasket and bolt requirements.
- Use compatible CPVC joining materials and procedures.
