Merit Brass
Schedule 40 316L Stainless Steel Welded Pipe
- SKU:
- SPS40T6L
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
- Shipping Notice:
- LTL Only
Description
Schedule 40 316L Stainless Steel Welded Pipe - 20' Lengths
Schedule 40 316L Stainless Steel Welded Pipe provides a heavier-wall stainless piping option for welded industrial, mechanical, and process piping systems. Supplied in 20-foot lengths, this pipe is manufactured to ASTM A312 / ASME SA312 requirements and is designed for fabrication with compatible welded fittings and additional lengths of pipe.
Schedule 40 has a thicker wall than Schedule 10 stainless steel pipe, providing a more substantial pipe wall for applications where the selected system design requires Schedule 40 construction. This product is identified as Grade 316L stainless steel, which offers excellent corrosion resistance for compatible service environments.
Product Highlights
- 316L stainless steel welded pipe
- Schedule 40 wall thickness
- 20-foot standard lengths
- ASTM A312 / ASME SA312
- Grade 316L
- Welded pipe construction
- Thicker wall than Schedule 10 pipe
- Excellent corrosion resistance
- Designed for welded piping systems
- Compatible with appropriately specified stainless steel weld fittings
- Pipe diameter and wall thickness chart available below
- Available for Will-Call from six distribution centers
Schedule 40 Construction
Schedule 40 stainless steel pipe has a thicker wall than Schedule 10 pipe of the same nominal size. This results in greater pipe weight and a more substantial wall section.
Actual wall thickness varies by nominal pipe size. Verify the required diameter and Schedule 40 wall thickness before ordering, fabrication, or installation.
316L Stainless Steel
316L stainless steel is a low-carbon austenitic stainless steel grade commonly selected for welded piping systems and corrosive service environments.
Its corrosion resistance and weldability make it well suited for many compatible industrial, mechanical, and process piping applications where 316L is specified.
Technical Specifications
| Product Type | Stainless Steel Welded Pipe |
|---|---|
| Material | 316L Stainless Steel |
| Grade | 316L |
| Schedule | Schedule 40 |
| Construction | Welded |
| Standard | ASTM A312 / ASME SA312 |
| Standard Length | 20 Feet |
| Connection Method | Field Welded to Compatible Pipe, Fittings, and Components |
| Primary Use | Industrial, Mechanical, and Process Piping |
Welded Pipe Construction
This product uses welded pipe construction. The pipe is formed and longitudinally welded during manufacturing, creating a weld seam as part of the finished pipe.
Field connections can be welded to compatible fittings and additional pipe lengths using an appropriate welding procedure for 316L stainless steel and the applicable piping system requirements.
Schedule 40 vs. Schedule 10
Schedule 40
- Thicker wall than Schedule 10
- Greater pipe weight per foot
- More substantial wall construction
- Used where Schedule 40 is specified by the system design
- This product configuration
Schedule 10
- Thinner wall construction
- Lower weight per foot
- Common where lighter-wall stainless pipe is suitable
- Different dimensional and mechanical characteristics
- Wall thickness varies by nominal pipe size
Why Choose 316L Stainless Steel?
Corrosion Resistance
- Excellent resistance in many compatible service environments
- Commonly specified in industrial piping
- Useful where greater corrosion resistance than 304-series stainless is desired
- Suitable for many process and mechanical applications
- Final suitability depends on the conveyed media and environment
Welded Fabrication
- Low-carbon stainless steel grade
- Well suited to welded fabrication
- Compatible with properly specified weld fittings
- Supports shop and field fabrication
- Common in stainless steel piping systems
Common Applications
Commercial & Mechanical Piping
- Mechanical piping systems
- Equipment piping
- Utility piping
- Fabricated stainless steel assemblies
- Compatible fluid piping applications
Industrial & Process Piping
- Process piping systems
- Industrial fabrication
- Plant utility systems
- Stainless steel distribution piping
- Applications requiring Schedule 40 316L welded pipe
Fabrication & Installation Guidance
- Confirm the required nominal pipe size before ordering.
- Verify Schedule 40 wall thickness for the selected nominal size.
- Confirm ASTM A312 / ASME SA312 requirements are appropriate for the project.
- Use compatible stainless steel weld fittings and piping components.
- Cut and prepare pipe ends using appropriate stainless steel fabrication practices.
- Use a qualified welding procedure appropriate for 316L stainless steel.
- Maintain proper fit-up and alignment before welding.
- Avoid contamination from carbon steel tools or fabrication surfaces where required.
- Support 20-foot pipe lengths appropriately during handling and installation.
- Confirm pressure, temperature, media, corrosion, and mechanical requirements before use.
- Installation should follow applicable piping codes, welding requirements, and project specifications.
20-Foot Pipe Lengths
This pipe is supplied in 20-foot lengths. Full-length pipe requires appropriate planning for transportation, storage, handling, and installation.
Because of the size and shipping characteristics of 20-foot pipe, Will-Call may be the preferred fulfillment option for many orders.
Will-Call Availability
Available to Will-Call from any of our six distribution centers:
- Reno, Nevada
- Dallas, Texas
- Birmingham, Alabama
- Cleveland, Ohio
- Houston, Texas
- Long Beach, California
Availability may vary by pipe size and location. Confirm current inventory and pickup location before traveling to the distribution center.
Important Ordering Notes
- Product is Schedule 40 316L stainless steel welded pipe.
- Grade identified as 316L.
- Conforms to ASTM A312 / ASME SA312 according to the supplied product information.
- Supplied in 20-foot lengths.
- Schedule 40 has a thicker wall than Schedule 10 pipe.
- Welded pipe construction includes a longitudinal weld seam.
- 316L provides excellent corrosion resistance for compatible applications.
- Confirm nominal pipe size and Schedule 40 wall thickness before ordering.
- Confirm pressure, temperature, media, and corrosion requirements for the intended application.
- Use appropriate stainless steel welding and fabrication practices.
- Full-length pipe requires appropriate handling and transportation.
- Available for Will-Call from Reno, Dallas, Birmingham, Cleveland, Houston, and Long Beach distribution centers.
- Confirm current inventory at the selected Will-Call location before pickup.
- Refer to the pipe chart for dimensional and wall thickness information.
Product Documents
Frequently Asked Questions
What grade of stainless steel is this pipe?
The supplied product information identifies this pipe as Grade 316L stainless steel.
What schedule is this pipe?
This pipe is Schedule 40.
How long is each pipe length?
Each standard length is 20 feet.
Is this seamless or welded pipe?
This is welded stainless steel pipe.
What standards does this pipe meet?
The supplied product information identifies ASTM A312 / ASME SA312.
Is Schedule 40 thicker than Schedule 10?
Yes. Schedule 40 has a thicker wall than Schedule 10 for the same nominal pipe size. Exact wall thickness should be verified using the pipe chart.
What is the advantage of 316L stainless steel?
316L offers excellent corrosion resistance and is commonly selected for welded piping applications. Final suitability depends on the specific service environment and conveyed media.
Can this pipe be welded to stainless steel fittings?
Yes. It is intended for compatible welded piping systems. Welding procedures, preparation, and filler materials should be appropriate for 316L stainless steel and the intended application.
Does welded pipe have a seam?
Yes. Welded pipe is manufactured with a longitudinal weld seam as part of its construction.
Where can I find the exact wall thickness?
Use the Pipe Chart: Diameters & Wall Thicknesses in the Product Documents section above.
Is this pipe available for Will-Call?
Yes. The supplied information identifies Will-Call availability from the Reno, Dallas, Birmingham, Cleveland, Houston, and Long Beach distribution centers.
Can I pick up a full 20-foot length?
The product is supplied in 20-foot lengths and is listed as available for Will-Call. Confirm the selected size and current inventory at your preferred distribution center before pickup.
Ask Willy: Product Selection & Support
Our GetPipe.com team can help review sizing, material, connection requirements, and product information before you order.
