Hilti
SC 6ML-22 Cordless circular saw for metal
- SKU:
- 3884096
- Availability:
- Usually Ships Same Day
- Weight:
- 7.00 LBS
Description
Hilti SC 6ML-22 Cordless Circular Saw for Metal
The Hilti SC 6ML-22 Cordless Circular Saw is a Nuron-powered professional metal-cutting saw engineered for fast, clean, and precise cutting in steel, stainless steel, and non-ferrous metals.
Featuring a 6-1/2" blade, 2.36" (60 mm) maximum cutting depth, 4,000 RPM no-load speed, chip collector, and rapid blade brake, the SC 6ML-22 is designed for productive metal cutting with fewer sparks and less heat than abrasive cutting methods. Guide rail compatibility, an integrated LED work light, and cordless Nuron mobility make it well suited for conduit, pipe, channel, sheet metal, HVAC, electrical, and general metal fabrication applications.
Product Highlights
- Professional cordless circular saw designed specifically for metal cutting
- Powered by the Hilti Nuron 22V cordless battery platform
- Cold-cutting design for fast, smooth, low-spark cutting
- 6-1/2" blade diameter
- Maximum cutting depth: 2.36" (60 mm)
- No-load speed: 4,000 RPM
- Designed for steel, stainless steel, and non-ferrous metals
- Chip collector helps manage metal cutting debris
- Rapid blade brake
- Compatible with Hilti guide rails for accurate straight cuts
- Integrated LED work light for improved cutting-area visibility
- Designed to produce fewer sparks and less workpiece heat than abrasive cutting methods
- Suitable for conduit, pipe, tubing, channel, structural profiles, and sheet metal
Technical Specifications
| Product Type | Cordless Circular Saw for Metal |
|---|---|
| Manufacturer | Hilti |
| Model | SC 6ML-22 |
| Battery Platform | Hilti Nuron 22V |
| Blade Diameter | 6-1/2" (6.5") |
| Maximum Cutting Depth | 2.36" (60 mm) |
| No-Load Speed | 4,000 RPM |
| Base Materials | Steel, Stainless Steel, Non-Ferrous Metal |
| Guide Rail Compatible | Yes |
| Maximum Bevel Angle | 0° |
| Debris Management | Chip Collector |
| Blade Brake | Rapid Blade Brake |
| Work Light | Integrated LED |
Cold-Cut Metal Cutting
The SC 6ML-22 is engineered specifically for cold-cutting metal applications, providing fast and smooth cutting while producing fewer sparks and less heat than abrasive cutting methods.
This cutting approach helps keep the workpiece cooler while providing the clean, controlled cutting performance needed for professional metal fabrication and construction work.
6-1/2" Cutting System
The SC 6ML-22 uses a 6-1/2" metal-cutting circular saw blade and provides a maximum supplied cutting depth of 2.36" (60 mm).
A 6-1/2" X-Cut Circular Saw Blade is included in the supplied package contents, providing a cutting configuration designed for the saw's professional metal-cutting applications.
4,000 RPM Cutting Speed
The SC 6ML-22 operates at a supplied 4,000 RPM no-load speed for fast cutting across steel, stainless steel, and non-ferrous metal applications.
The saw's cutting system is designed to combine productive cutting speed with the smoother, lower-spark characteristics of cold-cutting technology.
Built-In Chip Collection
An integrated chip collector helps capture metal chips and cutting debris produced during operation.
The chip management system supports a cleaner work area when cutting conduit, pipe, tubing, structural profiles, sheet metal, and other compatible metal materials.
Rapid Blade Brake
The SC 6ML-22 incorporates a rapid blade brake designed to stop the blade quickly following a cut.
This feature complements the saw's professional metal-cutting configuration during repetitive fabrication, installation, and construction work.
Guide Rail Compatible
The SC 6ML-22 is compatible with Hilti guide rails for applications requiring highly accurate straight cuts.
Guide rail compatibility provides additional control for straight cutting of compatible sheet metal, panels, and other metal components where consistent cut alignment is important.
Integrated LED Work Light
An integrated LED work light helps illuminate the cutting area for improved visibility during operation.
This additional visibility supports accurate positioning when cutting metal components in lower-light jobsite and installation environments.
Hilti Nuron 22V Platform
The SC 6ML-22 operates on the Hilti Nuron 22V cordless battery platform, providing cordless flexibility for professional metal cutting throughout the jobsite.
The Nuron platform is designed to provide the cutting speed and runtime required for demanding fabrication and installation applications without relying on a corded power source.
Metal Cutting Applications
The SC 6ML-22 is designed for professional cutting across a variety of metal materials and components, including:
- Steel
- Stainless steel
- Non-ferrous metals
- Steel channels
- Conduit
- Pipe
- Tubing
- Structural profiles
- Sandwich panels
- Corrugated sheet metal
- Sheet metal components
What's Included
- 1x Hilti SC 6ML-22 Cordless Circular Saw
- 1x 6-1/2" X-Cut Circular Saw Blade
- 1x Parallel Guide
- 1x Instruction Manual (varies by kit)
Why Choose the Hilti SC 6ML-22?
Metal Cutting Performance
- 6-1/2" blade diameter
- 2.36" (60 mm) maximum cutting depth
- 4,000 RPM no-load speed
- Cold-cutting technology
- Low-spark cutting
- Reduced workpiece heat compared with abrasive cutting
Professional Jobsite Features
- Hilti Nuron 22V platform
- Integrated chip collector
- Rapid blade brake
- Hilti guide rail compatibility
- Integrated LED work light
- Ergonomic cordless design
Typical Applications
Pipe, Conduit & Profiles
- Cutting steel channels
- Conduit cutting
- Pipe cutting
- Tubing cutting
- Structural profile cutting
- Electrical conduit and strut installation
Sheet Metal & Fabrication
- HVAC ductwork fabrication and installation
- Sandwich panel cutting
- Corrugated sheet metal cutting
- Corrective trimming of sheet metal components
- Finishing sheet metal components
- General metal fabrication and construction work
Setup & Use
Select an appropriate 6-1/2" metal-cutting blade for the material and intended cutting application.
Install and secure the blade according to applicable Hilti operating instructions.
Position the workpiece and set the required cutting depth for the intended application.
When highly accurate straight cuts are required, configure the saw with a compatible Hilti guide rail.
Install a compatible Hilti Nuron 22V battery before cordless operation.
Use the integrated LED work light as needed to improve visibility around the cutting area.
Always follow applicable Hilti operating instructions and jobsite safety requirements when setting up and operating the metal-cutting circular saw.
Our specialists can help with the Hilti SC 6ML-22 Cordless Circular Saw, Nuron batteries and chargers, compatible metal-cutting blades, guide rails, and selecting the right cutting setup for your metal application.
Email the GetPipe.com Team Visit Quick SupportFrequently Asked Questions
What is the Hilti SC 6ML-22 designed to cut?
The supplied product information identifies steel, stainless steel, and non-ferrous metals as the primary base materials. Applications include conduit, pipe, tubing, channel, structural profiles, sandwich panels, and sheet metal.
What size blade does the SC 6ML-22 use?
The supplied blade diameter is 6-1/2" (6.5"). A 6-1/2" X-Cut Circular Saw Blade is included in the supplied package contents.
What is the maximum cutting depth?
The supplied maximum cutting depth is 2.36" (60 mm).
What is the no-load speed?
The supplied no-load speed is 4,000 RPM.
Can the SC 6ML-22 make bevel cuts?
The supplied maximum bevel angle is 0°, so the supplied specifications do not identify bevel-cutting capability.
Is the SC 6ML-22 guide rail compatible?
Yes. The supplied product information identifies compatibility with Hilti guide rails for accurate straight cuts.
Does the SC 6ML-22 have a chip collector?
Yes. The saw includes a chip collector designed to help manage metal chips and cutting debris.
Does the SC 6ML-22 have a blade brake?
Yes. The supplied product information identifies a rapid blade brake.
Does the SC 6ML-22 produce sparks?
The supplied product information describes the SC 6ML-22 as a cold-cutting saw designed for low-spark cutting, producing fewer sparks than abrasive cutting methods.
Does the saw have an LED work light?
Yes. An integrated LED work light is identified for improved visibility around the cutting area.
What battery platform does the SC 6ML-22 use?
The SC 6ML-22 operates on the Hilti Nuron 22V cordless battery platform.
What comes with the SC 6ML-22?
The supplied package contents include the SC 6ML-22 Cordless Circular Saw, 6-1/2" X-Cut Circular Saw Blade, parallel guide, and an instruction manual that varies by kit.
Important Ordering & Use Notes
- This listing covers the Hilti SC 6ML-22 Cordless Circular Saw for Metal.
- The saw operates on the Hilti Nuron 22V cordless battery platform.
- The supplied blade diameter is 6-1/2" (6.5").
- The supplied maximum cutting depth is 2.36" (60 mm).
- The supplied no-load speed is 4,000 RPM.
- The supplied maximum bevel angle is 0°.
- Supplied base materials are steel, stainless steel, and non-ferrous metal.
- The saw incorporates a chip collector, rapid blade brake, and integrated LED work light.
- The SC 6ML-22 is compatible with Hilti guide rails for accurate straight cutting.
- The supplied product information describes the saw as using cold-cutting technology for smoother cuts with fewer sparks and less heat than abrasive cutting methods.
- Typical supplied applications include cutting conduit, pipe, tubing, channel, structural profiles, HVAC ductwork, sandwich panels, corrugated sheet metal, and other metal components.
- Included components are the SC 6ML-22 saw, 6-1/2" X-Cut Circular Saw Blade, parallel guide, and instruction manual that varies by kit.
- Specific battery model, battery quantity, charger, tool body weight, tool dimensions, blade arbor size, guide rail model, sound level, vibration rating, runtime, and individual Hilti part number were not supplied and are not stated here.
- Follow applicable Hilti instructions for blade selection, material compatibility, battery selection, guide rail use, operation, maintenance, and safety.
