Dixon
RD150EZ - EZ Boss-Lock Cam & Groove/Camlock Type D Coupler x Female NPT
- SKU:
- RD150EZ
- Availability:
- Usually Ships Same Day
- Weight:
- 1.74 LBS
Description
Engineered to connect.
Built to perform.
RD150EZ — EZ Boss-Lock Cam & Groove/Camlock Type D Coupler x Female NPT RD150EZ is Dixon’s EZ Boss-Lock Cam & Groove/Camlock Type D Coupler x Female NPT. Match its connection arrangement and material to the intended application, then review the exact model’s mating parts, sealing requirements and service limits before ordering. Construction: Buna-N gasket
Small part.
Big connection.
Dixon RD150EZEZ Boss-Lock Cam & Groove/Camlock Type D Coupler x Female NPT
Start with the correct Dixon part, then confirm every mating connection.
Selection & Installation
Thread match: Match the male or female thread system and size, then check the cam end separately. Do not treat NPT, BSP or hose threads as interchangeable because their nominal sizes look similar.
Seal and service: Check the sealing method and installed cam seal against the medium, temperature and pressure. Follow the limits for the exact fitting and mating parts; successful thread engagement alone does not establish service suitability for the complete connection.
How It WorksTo make a connection, simply slide the adapter into the coupler and with normal hand pressure, press the cam levers down. Uncoupling is as quick and simple as coupling. Just lift the cam arms and remove the adapter. No more fumbling with clamps, wire, clips or pins, just close the handles and the locking mechanism is engaged. Extremely easy to open, the releaser lever is under your thumb when you want to open the fitting, ergonomic.
NoteIf the rotating lever is not flush with the handle, it is not properly engaged.
Safety NotesUnder no circumstances should cam and groove couplings be used for compressed air or steam service! Under no circumstances should the EZ Boss-Lock cam arms be used on any fitting not specifically designed for their use. Pressure rating recommendations are based on the use of mating Dixon fittings at ambient temperature 70°F / 21°C with a standard seal installed. For use at elevated temperature or other unusual operating conditions, consult Dixon.
WARNINGThis product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
Product documents
3 PDF REFERENCES
Ask Willy: Need help choosing the right Dixon part?
Need help confirming RD150EZ? Share the application, mating equipment and required quantity with the GetPipe.com team so the correct Dixon part can be checked before ordering.
Frequently Asked Questions
What should I match before ordering?
Confirm the exact part number, connection sizes and mating components. Review the seal and attachment requirements for this model rather than selecting by nominal size alone.
Can this be used for compressed air or steam?
No. Dixon’s safety notes prohibit compressed-air and steam service for this product. Confirm the permitted medium and all model-specific pressure, temperature and seal requirements before use.
What should I inspect before use?
Check the fitting, seals and mating components for damage and confirm correct assembly. Follow the manufacturer’s connection and release procedure before placing the equipment in service.