Lesso America
PVC SDR 35 Tee (H x H x H)
- SKU:
- LSW441
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
PVC SDR 35 Tee (Hub x Hub x Hub)
PVC SDR 35 Tees provide a three-way branch connection for compatible gravity-flow sewer, stormwater, wastewater, and drainage piping systems.
Featuring hub connections on all three openings, this tee is designed to join three compatible SDR 35 PVC pipe sections in a T-shaped configuration. The straight-through run continues the primary piping path while the branch connection enters at approximately 90 degrees. Constructed from durable PVC, the fitting offers resistance to corrosion, moisture, soil exposure, and many compatible chemicals for dependable use in underground, non-pressure drainage systems.
Product Highlights
- PVC SDR 35 tee fitting
- Hub x Hub x Hub connection configuration
- Three hub-style connections
- Connects three compatible SDR 35 PVC pipe sections
- Provides a 90-degree branch connection
- Straight-through main run
- Useful for branch and distribution connections
- Designed for gravity-flow sewer and drainage systems
- Suitable for non-pressure applications
- Designed for solvent-weld installation
- Helps provide secure, leak-resistant joints when properly installed
- Durable PVC construction
- Lightweight for easier handling and installation
- Resistant to corrosion
- Resistant to moisture exposure
- Resistant to many compatible chemicals
- Suitable for underground installations
- Suitable for sanitary sewer applications where permitted
- Suitable for stormwater drainage
- Suitable for wastewater piping
- Suitable for residential, commercial, and municipal systems
Technical Specifications
| Product Type | PVC SDR 35 Tee |
|---|---|
| Material | PVC |
| Connection Type | Hub x Hub x Hub |
| Number of Connections | 3 |
| Branch Configuration | 90° Tee |
| Pipe Compatibility | Compatible SDR 35 PVC Sewer Pipe |
| Joint Method | Solvent Weld |
| System Type | Sewer and Drainage |
| Flow Type | Gravity Flow |
| Pressure Service | Non-Pressure |
| Primary Function | Create a Three-Way Branch Connection in SDR 35 PVC Piping |
| Typical Applications | Stormwater, Wastewater, Underground Drainage, Sewer Piping, Residential, Commercial, and Municipal Systems |
Connection Configuration
Inlet Hub
One hub accepts compatible SDR 35 PVC pipe along the main run of the system.
Branch Hub
The branch hub accepts a third compatible SDR 35 PVC pipe section at approximately 90 degrees to the main run.
Outlet Hub
The opposite run hub accepts the continuing SDR 35 PVC pipe section.
Tee Design
This fitting combines a straight-through run with a perpendicular branch connection in a single molded component.
The configuration is useful where three SDR 35 pipe sections need to meet at a common connection point or where a branch must be added to an existing drainage layout.
Unlike a sanitary tee, a standard tee uses a more direct 90-degree branch intersection rather than a swept directional branch. Verify that this geometry is appropriate for the intended flow direction and application before installation.
Why Choose a PVC SDR 35 Tee?
Three-Way Connection
- Connects three SDR 35 pipe sections
- Provides a perpendicular branch
- Maintains a straight-through main run
- Useful for distribution and branch layouts
- Integrates directly with compatible SDR 35 pipe
PVC Construction
- Corrosion resistant
- Lightweight construction
- Suitable for underground service
- Resistant to moisture exposure
- Suitable for many compatible drainage environments
Typical Applications
Drainage Systems
- Stormwater drainage
- Yard drainage systems
- Site drainage networks
- Underground drainage
- Gravity-flow piping systems
Sewer & Wastewater
- Wastewater piping
- Underground sewer piping
- Branch connections where tee geometry is permitted
- Residential drainage systems
- Commercial and municipal piping networks
Construction Details
Manufactured from durable PVC, this SDR 35 tee is designed for long-term use in underground sewer and drainage environments.
The material provides resistance to corrosion, moisture, soil conditions, and many compatible chemicals while remaining lightweight for easier handling and installation.
Precision-molded hub connections help provide proper fit and alignment with compatible SDR 35 PVC sewer pipe.
Installation
Verify all nominal connection sizes and confirm compatibility with the SDR 35 PVC pipe being installed.
Determine the intended main run, branch direction, and flow path before assembling the fitting.
Confirm that a standard 90-degree tee is appropriate for the intended application and permitted by applicable plumbing, sewer, stormwater, or drainage requirements.
Cut all mating pipe ends square and remove burrs, dirt, and debris that could interfere with proper insertion.
Clean and prepare the pipe ends and fitting hubs according to accepted PVC solvent-weld installation procedures.
Dry-fit all three pipe sections before applying primer or solvent cement to confirm insertion depth, branch orientation, alignment, and drainage slope.
Apply approved PVC primer and solvent cement as required and fully seat each pipe section into its corresponding hub.
Maintain proper fitting orientation and pipe support while the joints set.
Allow completed solvent-weld joints to cure according to the solvent cement manufacturer's recommendations before backfilling or placing the system into service.
Our piping specialists can help review your SDR 35 pipe sizes, branch configuration, flow direction, and sewer or drainage application before you order.
Email the GetPipe.com Team Visit Quick SupportFrequently Asked Questions
What is a PVC SDR 35 tee used for?
It is used to connect three compatible SDR 35 PVC pipe sections in a T-shaped configuration with a straight run and a 90-degree branch.
What does Hub x Hub x Hub mean?
It means all three openings are hub-style connections designed to receive compatible SDR 35 PVC pipe.
How many pipe sections connect to this fitting?
Three compatible SDR 35 PVC pipe sections can connect to the fitting.
How is this different from an SDR 35 sanitary tee?
A standard tee uses a more direct 90-degree branch intersection, while a sanitary tee uses a swept branch intended to guide flow more gradually toward the downstream run.
Does the branch enter at 90 degrees?
Yes. A standard tee provides a perpendicular branch connection to the straight-through run.
How is the fitting installed?
All three hub connections are intended for compatible PVC solvent-weld installation.
Is this fitting intended for pressure service?
No. The supplied product information identifies it for underground, non-pressure SDR 35 sewer and drainage systems.
Can it be used for stormwater systems?
Yes. Stormwater drainage is identified as a suitable application.
Can it be used for wastewater piping?
Yes. Wastewater applications are included in the supplied product information.
Can it be used in sanitary sewer piping?
The supplied information identifies sanitary sewer applications, but standard tee geometry may not be appropriate for every gravity-flow sanitary connection. Verify the fitting orientation and local code requirements before installation.
Should all three connections be dry-fitted first?
Yes. Dry-fitting helps confirm sizing, branch orientation, insertion depth, alignment, and available installation space before permanent solvent-weld joints are completed.
What should I verify before ordering?
Confirm all three nominal SDR 35 connection sizes, required branch configuration, intended flow direction, and whether a standard tee is appropriate for the application.
Important Ordering & Installation Notes
- This listing is for a PVC SDR 35 Tee.
- Connection configuration is Hub x Hub x Hub.
- Verify all three nominal connection sizes before ordering.
- Confirm compatibility with the specific SDR 35 PVC pipe being installed.
- All three openings are hub-style connections.
- Each hub is designed to receive compatible SDR 35 PVC pipe.
- The fitting provides a straight-through run and approximately 90-degree branch.
- A standard tee is different from a sanitary tee.
- Confirm that standard tee geometry is appropriate for the intended application.
- Determine the main run, branch direction, and intended flow path before installation.
- Verify applicable plumbing, sewer, stormwater, and drainage code requirements.
- All three connections are intended for solvent-weld installation.
- Dry-fit the complete assembly before applying primer or solvent cement.
- Confirm insertion depth, branch orientation, alignment, and slope before final assembly.
- Cut all mating pipe ends square.
- Remove burrs, dirt, and debris from all mating surfaces.
- Clean and prepare all mating surfaces before solvent welding.
- Use approved PVC primer and solvent cement according to manufacturer instructions.
- Fully seat each pipe section into its corresponding hub.
- Maintain proper fitting orientation and pipe support while the joints set.
- Maintain required drainage slope throughout the piping system.
- Allow completed solvent-weld joints to cure according to the cement manufacturer's recommendations before service or backfilling.
- This fitting is intended for non-pressure sewer and drainage applications.
- Suitable applications may include stormwater, wastewater, underground drainage, and sewer piping where the tee configuration is appropriate.
- Consult manufacturer documentation for complete dimensions and branch geometry.
- Consult manufacturer documentation for installation and operating limitations.
- Follow applicable plumbing, sewer, stormwater, and drainage codes.
