Lesso America
PVC SDR 35 Sanitary Tee (H x H x H)
- SKU:
- LSW400
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
PVC SDR 35 Sanitary Tee (Hub x Hub x Hub)
PVC SDR 35 Sanitary Tees are designed to connect a branch line into a compatible gravity-flow sewer or drainage system while maintaining a controlled directional transition.
Featuring hub connections on all three ends, this sanitary tee provides a branch connection within SDR 35 PVC piping systems and is intended for non-pressure drainage applications. The molded branch geometry helps direct flow into the main run while the three hub connections allow solvent-weld installation with compatible SDR 35 PVC pipe. Constructed from durable PVC, the fitting offers resistance to corrosion, moisture, soil exposure, and many compatible chemicals for dependable use in sanitary sewer, stormwater, wastewater, and underground drainage systems.
Product Highlights
- PVC SDR 35 sanitary tee
- Hub x Hub x Hub connection configuration
- Three hub-style connections
- Connects a branch line into a main drainage run
- Designed for compatible SDR 35 PVC sewer pipe
- Supports directional flow through the branch connection
- Designed for gravity-flow sewer and drainage systems
- Suitable for non-pressure applications
- Designed for solvent-weld installation
- Provides secure, leak-resistant joints when properly installed
- Durable PVC construction
- Lightweight for easier handling and installation
- Resistant to corrosion
- Resistant to moisture exposure
- Resistant to many compatible chemicals
- Suitable for underground installations
- Suitable for sanitary sewer systems
- Suitable for stormwater drainage
- Suitable for wastewater piping
- Suitable for residential, commercial, and municipal systems
Technical Specifications
| Product Type | PVC SDR 35 Sanitary Tee |
|---|---|
| Material | PVC |
| Connection Type | Hub x Hub x Hub |
| Number of Connections | 3 |
| Pipe Compatibility | Compatible SDR 35 PVC Sewer Pipe |
| Joint Method | Solvent Weld |
| System Type | Sewer and Drainage |
| Flow Type | Gravity Flow |
| Pressure Service | Non-Pressure |
| Primary Function | Connect a Branch Line into an SDR 35 Sewer or Drainage Run |
| Typical Applications | Sanitary Sewer, Stormwater, Wastewater, Underground Drainage, Residential, Commercial, and Municipal Systems |
Connection Configuration
Run Hub
One hub connects to the upstream section of compatible SDR 35 PVC pipe.
Branch Hub
The branch hub accepts compatible SDR 35 PVC pipe and introduces flow into the main drainage run.
Outlet Hub
The remaining hub connects to the downstream SDR 35 pipe section to continue the drainage system.
Sanitary Tee Design
The sanitary tee combines a straight-through main run with a curved branch connection in a single molded fitting.
This branch geometry is designed to guide incoming flow toward the downstream portion of the drainage line instead of creating an abrupt intersection.
The Hub x Hub x Hub configuration allows compatible SDR 35 pipe to connect directly at all three openings using solvent-weld joints.
Why Choose a PVC SDR 35 Sanitary Tee?
Branch-Line Connection
- Connects three pipe sections
- Adds a branch to a main drainage run
- Provides a directional branch transition
- Useful for sewer and drainage layouts
- Integrates directly with SDR 35 pipe
PVC Construction
- Corrosion resistant
- Lightweight construction
- Suitable for underground service
- Resistant to moisture exposure
- Suitable for many compatible drainage environments
Typical Applications
Sewer Systems
- Sanitary sewer piping
- Building sewer connections
- Branch drain connections
- Residential sewer systems
- Commercial and municipal sewer systems
Drainage Systems
- Stormwater drainage
- Wastewater piping
- Underground drainage
- Gravity-flow drain systems
- Branch connections in buried piping networks
Construction Details
Manufactured from durable PVC, this sanitary tee is designed for long-term use in underground sewer and drainage environments.
The material provides resistance to corrosion, moisture, soil conditions, and many compatible chemicals while remaining lightweight for easier handling and installation.
Precision-molded hub connections help provide proper fit and alignment with compatible SDR 35 PVC sewer pipe, while the molded branch transition supports controlled flow into the main line.
Installation
Verify all nominal connection sizes and confirm compatibility with the SDR 35 PVC pipe being installed.
Determine the intended flow direction and branch orientation before assembling the fitting.
Cut each mating pipe end square and remove burrs, dirt, and debris that could interfere with proper insertion.
Clean and prepare all pipe ends and fitting hubs according to accepted PVC solvent-weld installation procedures.
Dry-fit all three connections before applying primer or solvent cement to confirm insertion depth, branch orientation, alignment, and drainage slope.
Apply approved PVC primer and solvent cement as required and fully seat each pipe section into its corresponding hub.
Maintain proper orientation and support the assembly while the joints set.
Allow completed solvent-weld joints to cure according to the solvent cement manufacturer's recommendations before backfilling or placing the drainage system into service.
Our piping specialists can help review your SDR 35 pipe sizes, branch configuration, flow direction, and sewer or drainage application before you order.
Email the GetPipe.com Team Visit Quick SupportFrequently Asked Questions
What is a PVC SDR 35 sanitary tee used for?
It is used to connect a branch pipe into a compatible SDR 35 sewer or drainage run.
What does Hub x Hub x Hub mean?
It means all three openings are hub-style connections designed to receive compatible SDR 35 PVC pipe.
How many pipe sections connect to this fitting?
Three pipe sections can connect to the fitting: two along the main run and one at the branch.
How is the fitting installed?
All three hub connections are intended for compatible PVC solvent-weld installation.
What is the purpose of the curved branch?
The branch geometry helps direct incoming flow toward the downstream side of the main drainage line rather than creating an abrupt intersection.
Is this fitting intended for pressure service?
No. The supplied product information identifies it for gravity-flow, non-pressure sewer and drainage systems.
Can it be installed underground?
Yes. Underground sanitary sewer, stormwater, wastewater, and drainage systems are identified as suitable applications.
Can it be used in sanitary sewer systems?
Yes. Sanitary sewer is one of the primary applications identified for this fitting.
Can it be used for stormwater drainage?
Yes. The supplied product information identifies stormwater and drainage systems as suitable applications.
Does fitting orientation matter?
Yes. The branch should be oriented so flow enters the main run in the intended downstream direction and in accordance with the system design and applicable installation requirements.
Should all three connections be dry-fitted first?
Yes. Dry-fitting helps confirm sizing, insertion depth, branch direction, alignment, and drainage slope before permanent solvent-weld joints are completed.
What should I verify before ordering?
Confirm all three nominal SDR 35 connection sizes, the required sanitary tee configuration, branch orientation, and compatibility with the intended sewer or drainage system.
Important Ordering & Installation Notes
- This listing is for a PVC SDR 35 Sanitary Tee.
- Connection configuration is Hub x Hub x Hub.
- Verify all three nominal connection sizes before ordering.
- Confirm compatibility with the specific SDR 35 PVC pipe being installed.
- All three openings are hub-style connections.
- Each hub is designed to receive compatible SDR 35 PVC pipe.
- The fitting is designed to create a branch connection within a gravity-flow drainage system.
- Determine the intended flow direction before installation.
- Orient the branch to direct flow toward the downstream portion of the system.
- Confirm that the sanitary tee configuration is appropriate for the intended piping layout.
- Verify applicable code requirements for the planned branch connection.
- All three connections are intended for solvent-weld installation.
- Dry-fit the complete assembly before applying primer or solvent cement.
- Confirm insertion depth, branch orientation, alignment, and slope before final assembly.
- Cut all mating pipe ends square.
- Remove burrs, dirt, and debris from all mating surfaces.
- Clean and prepare all mating surfaces before solvent welding.
- Use approved PVC primer and solvent cement according to manufacturer instructions.
- Fully seat each pipe section into its corresponding hub.
- Maintain proper fitting orientation and pipe support while the joints set.
- Maintain the required drainage slope through the system.
- Allow completed solvent-weld joints to cure according to the cement manufacturer's recommendations before service or backfilling.
- This fitting is intended for non-pressure sewer and drainage applications.
- Suitable applications may include sanitary sewer, stormwater, wastewater, and underground drainage systems.
- Consult manufacturer documentation for complete dimensions and branch geometry.
- Consult manufacturer documentation for installation and operating limitations.
- Follow applicable plumbing, sewer, stormwater, and drainage codes.
