Spears
PVC DWV No-Hub Adapter (SPG x HUB)
- SKU:
- P119
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
PVC DWV No-Hub Adapter (SPG x HUB)
PVC DWV No-Hub Adapter (SPG x HUB) provides a transition between compatible DWV piping components using one spigot connection and one hub connection. The spigot end fits into an appropriately sized compatible receiving hub, while the hub end receives the corresponding compatible pipe or fitting connection.
The SPG x HUB adapter configuration combines two different connection interfaces within one PVC DWV fitting. Selection should account for nominal size, adjoining connection types, PVC DWV compatibility, joining requirements, piping alignment, support, and available installation clearance.
Product Highlights
- PVC construction
- DWV fitting design
- No-hub adapter configuration
- Spigot x hub connections
- Provides a piping transition
- Combines two connection interfaces
- Integrates into compatible PVC DWV piping layouts
- Connects compatible DWV components using spigot and hub interfaces
Technical Specifications
| Product Type | No-Hub Adapter |
|---|---|
| Material | PVC |
| System Type | DWV |
| Connection | Spigot x Hub (SPG x HUB) |
| Connection Count | Two |
| Fitting Configuration | Adapter |
| Spigot Interface | Compatible Receiving Hub |
| Hub Interface | Compatible Pipe or Fitting Connection |
| Connection Style | Spigot x Hub |
| Joining Method | Compatible PVC DWV Joining Procedure |
| Piping Configuration | Connection Transition |
| Primary Function | Transition Between Compatible DWV Components Using Spigot and Hub Interfaces |
No-Hub Adapter Design
The adapter configuration provides a transition between compatible DWV components using spigot and hub-style connection interfaces. This allows adjoining components with different connection forms to be incorporated into the same piping layout.
The adapter should be positioned so both connection interfaces align naturally with the adjoining components. Planning the fitting location helps coordinate insertion depth, nearby fittings, pipe routing, support, and available working clearance.
Spigot & Hub Connections
The spigot connection fits into an appropriately sized compatible receiving hub, while the hub connection receives the corresponding compatible pipe or fitting interface. Each side should be matched to the correct adjoining component before assembly.
The mating surfaces should be prepared using the appropriate PVC DWV joining procedure for the connected components. Proper insertion, compatible joining materials, and careful alignment help establish the connections without placing unnecessary stress on the adapter.
PVC DWV Integration
The PVC DWV construction allows the adapter to integrate into compatible drain, waste, and vent piping arrangements requiring a spigot-to-hub transition. Matching the nominal size and connection interfaces to the adjoining components helps maintain the intended piping configuration.
Application suitability should be evaluated using the requirements of the complete DWV system. Adjoining materials, connection compatibility, joining materials, piping support, slope where applicable, and local installation requirements should all be considered during fitting selection.
Connection Transition
A PVC DWV No-Hub Adapter with SPG x HUB connections provides a compact transition between two compatible connection interfaces. The fitting can be incorporated where the piping arrangement requires one spigot-style end and one hub-style end.
Installation planning should consider insertion depth, adjoining component alignment, nearby fittings, available clearance, and piping support. Connected components should align naturally so the adapter is not relied upon to correct offsets or support improperly positioned piping.
Installation & Selection Considerations
- Confirm the nominal size.
- Verify the SPG x HUB arrangement.
- Check PVC DWV compatibility.
- Match both ends to adjoining components.
- Confirm alignment before final assembly.
Our PVC fitting specialists can help review your nominal size, DWV requirements, SPG x HUB configuration, adjoining components, joining requirements, piping alignment, support requirements, and available installation clearance before you order.
Frequently Asked Questions
What is a PVC DWV No-Hub Adapter used for?
It provides a transition between compatible DWV components using spigot and hub connection interfaces.
What does SPG mean?
SPG identifies a spigot-style connection designed to fit into an appropriately sized compatible receiving hub.
What does HUB mean?
HUB identifies a receiving connection designed for the corresponding compatible pipe or fitting interface.
How many connections does this adapter have?
The adapter has two connection interfaces: one spigot end and one hub end.
How is the adapter assembled?
The fitting should be installed using the compatible PVC DWV joining procedure appropriate for the adjoining components.
What should I confirm before ordering?
Confirm the nominal size, SPG x HUB arrangement, PVC DWV compatibility, and adjoining connection interfaces.
Important Ordering & Installation Notes
- Inspect both connections before use.
- Confirm the nominal connection size.
- Verify the SPG x HUB arrangement.
- Prepare adjoining components correctly.
- Confirm alignment before final assembly.
