Dixon
PPE300 - Glass-Filled Polypropylene Cam & Groove Type E Adapter x Hose Shank
- SKU:
- PPE300
- Availability:
- Usually Ships Same Day
- Weight:
- 0.66 LBS
Description
Engineered to connect.
Built to perform.
PPE300 — Glass-Filled Polypropylene Cam & Groove Type E Adapter x Hose Shank PPE300 is Dixon’s Glass-Filled Polypropylene Cam & Groove Type E Adapter x Hose Shank. Match its connection arrangement and material to the intended application, then review the exact model’s mating parts, sealing requirements and service limits before ordering. Construction: Manufactured from glass-filled polypropylene
Small part.
Big connection.
Dixon PPE300Glass-Filled Polypropylene Cam & Groove Type E Adapter x Hose Shank
Start with the correct Dixon part, then confirm every mating connection.
Selection & Installation
Hose fit: Match the hose size and construction to the shank and retention method. Check the mating cam size separately, and verify the actual hose and coupling combination rather than nominal size alone.
Material limits: Dixon states that polypropylene fittings must not be mixed with metal fittings and are not recommended with PTFE gaskets. Check the seal, medium and temperature against this model’s limits; do not transfer ratings from other materials.
Safety NotesUnder no circumstances should cam and groove couplings be used for compressed air or steam service! Pressure rating is based on the seal of the mating part Pressure rating recommendations are based on the use of mating Dixon® fittings at ambient temperature 70°F (21°C) with a standard seal installed. For use at elevated temperature or other unusual operating conditions, consult Dixon®. Polypropylene cam and groove should not be mixed with metal fittings. NOT recommended for use with PTFE gaskets
WARNINGThis product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
Product documents
4 PDF REFERENCES
Ask Willy: Need help choosing the right Dixon part?
Need help confirming PPE300? Share the application, mating equipment and required quantity with the GetPipe.com team so the correct Dixon part can be checked before ordering.
Frequently Asked Questions
What should I match before ordering?
Confirm the exact part number, connection sizes and mating components. Review the seal and attachment requirements for this model rather than selecting by nominal size alone.
Can this be used for compressed air or steam?
No. Dixon’s safety notes prohibit compressed-air and steam service for this product. Confirm the permitted medium and all model-specific pressure, temperature and seal requirements before use.
What should I inspect before use?
Check the fitting, seals and mating components for damage and confirm correct assembly. Follow the manufacturer’s connection and release procedure before placing the equipment in service.