Milwaukee
Milwaukee Tool SWITCHBLADE Selfeed Bit 1-3/8"
- SKU:
- MLW48-25-5120
- Availability:
- Usually Ships Same Day
- Weight:
- 0.49 LBS
Description
DUTY®
SWITCHBLADE
Selfeed Wood Bit
Bore repeated 1-3/8 in holes in wood with a selfeed bit whose cutting blade can be replaced.
Product Overview
Replace the worn 1-3/8-inch blade to renew the SWITCHBLADE cutting edge without resharpening.
The aggressive feed screw pulls through wood; engraved sizes match the blade to the body.
- Replaceable bladeRenew the cutting edge fast.
- Hardened steelHelps extend cutting life.
- Aggressive screwPulls forward through wood.
- Engraved sizeMatches blade and bit size.
Technical Specifications
- Hole diameter
- 1-3/8 in
- Blade material
- Hardened steel
- Blade service
- Replaceable
- Feed screw
- Aggressive self-feeding
- Size marking
- Engraved
- Work material
- Wood
Choose the Correct Fit
Check the required hole size and the tool’s rated capacity before cutting. Inspect the route for concealed services and metal.
Secure the work and brace the drill against the self-feeding pull; follow the tool’s operating instructions.
Installation & Care
Disconnect power before replacing a blade. Match its engraved size to the bit and follow the fastening instructions.
Clean the blade seat, feed screw and fasteners after use. Replace damaged components before the next drilling task.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need to match a SWITCHBLADE bit to a pipe or cable opening? Send Willy the hole size and drill model.
Important Product Questions
Do I sharpen this blade when it is dull?
The SWITCHBLADE system is designed to restore the cutting edge by replacing the blade. Use the correct replacement size for the bit body.
Can I change the hole size by fitting a different blade?
Match the blade’s engraved size to the bit body. A different-size blade is not a substitute for the correct bit.
What else should I inspect when changing blades?
Check the feed screw, blade seat and retaining fasteners for wear or damage. Isolate the tool and follow the replacement instructions.
