Milwaukee
Milwaukee Tool SDS Plus DUST TRAP Drilling Shroud - 1 Pack
- SKU:
- MLW48-03-3135
- Availability:
- Usually Ships Same Day
- Weight:
- 7.90 LBS
Description
DUTY®
DUST TRAP
Drilling Shroud
Contain drilling dust around SDS-Plus bits up to 8 in long, including overhead anchor work.
Product Overview
The clear sleeve lets you see the drilling point. Its collapsible body helps with access in confined positions.
A locking mechanism holds the shroud compact for storage. The sleeve can be replaced when worn.
- Clear sleeveKeeps the drilling point visible.
- Collapsible bodyFits into tighter work areas.
- Storage lockHolds the shroud collapsed.
- Stop-bit fitAccommodates SDS-Plus stop bits.
Technical Specifications
- Hammer fit
- SDS-Plus
- Maximum bit length
- 8 in overall
- Sleeve
- Clear
- Body design
- Collapsible
- Storage feature
- Locking mechanism
- Replacement sleeve
- 48-03-3235
Choose the Correct Fit
Check the bit’s overall length against the 8 in limit and confirm clearance at the planned hole.
Review the current Milwaukee dust-control instructions and the site’s silica-exposure plan before selecting a setup.
Installation & Care
Fit the shroud with the hammer isolated. Check that the sleeve is undamaged and positioned to collect dust.
Empty and clean the shroud using the approved dust-handling method. Replace a damaged sleeve before further drilling.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help choosing a dust-control setup? Send Willy the hammer model, bit length, drilling direction and job requirements.
Important Product Questions
Can I use this without a vacuum?
Milwaukee publishes an objective-data method for specified vacuum-free use. Confirm that your exact work and setup meet that method; the shroud alone is not a blanket compliance guarantee.
Does adding any vacuum make the setup compliant?
No. Check the required extractor, filtration, operation and exposure controls for the complete setup against the applicable instructions.
Which bits can it cover?
It fits SDS-Plus bits up to 8 in overall, including stop bits. Check the shroud instructions for the exact bit and anchor-installation accessory.
