Milwaukee
Milwaukee Tool SDS Bit 5/32" x 5" with 1/4" Hex
- SKU:
- MLW48-20-7090
- Availability:
- Usually Ships Same Day
- Weight:
- 0.11 LBS
Description
DUTY®
Concrete Screw
Installation Bit
Drill 5/32 in pilot holes for the matched concrete-screw system using an SDS-Plus rotary hammer.
Product Overview
The 2 in drilling depth and 5 in overall length define reach and working clearance.
A 1/4 in hex shoulder fits the drive sleeve. Two cutters drill brick, block and concrete.
- Hex shoulderWorks with the drive sleeve.
- Two-cutter headDrills masonry pilot holes.
- Reinforced fluteSupports impact resistance.
- Rebar chamfersHelp limit carbide chipping.
Technical Specifications
- Diameter
- 5/32 in
- Drilling depth
- 2 in
- Overall length
- 5 in
- Shank
- SDS-Plus
- Hex shoulder
- 1/4 in
- Cutter geometry
- 2-cutter
Choose the Correct Fit
Match the 5/32 in bit to the concrete-screw maker’s hole specification. Allow the required extra hole depth.
Check that the hammer accepts SDS-Plus bits. Use the correct drive sleeve for the concrete-screw installation system.
Installation & Care
Isolate the hammer to fit the bit or sleeve. Use the drilling and driving modes specified by the installation system.
Control drilling dust and follow the fastener’s hole-cleaning instructions. Inspect the carbide head before reuse.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help with concrete-screw installation? Send Willy the screw specification, hammer model and required hole depth.
Important Product Questions
Is the hex shoulder an impact-driver shank?
No. The tool connection is SDS-Plus. The 1/4 in hex shoulder is for the concrete-screw installation drive sleeve.
Which drive sleeve is intended for this bit?
Milwaukee identifies the drive sleeve supplied with installation kit 48-20-7497. Check the complete installation system before ordering accessories.
Does the overall length equal the usable drilling depth?
No. This bit is 5 in overall and has 2 in drilling depth. Match the latter to the hole required by the screw installation.
