Milwaukee
Milwaukee Tool OPEN-LOK All-Purpose Multi-Tool Blade Variety Pack 3PC
- SKU:
- MLW49-10-9001
- Availability:
- Usually Ships Same Day
- Weight:
- 1.49 LBS
Description
DUTY®
3-Blade OPEN-LOK
Variety Set
An OPEN-LOK blade assortment for matching the cutting edge to different repair and renovation tasks.
Product Overview
Match teeth to material: mixed repairs, hardwood trimming and metal removal need different edges.
Raised OPEN-LOK anchors permit flush work. Etched markings help identify the required blade.
- Blade selectionMatch the edge to the material.
- Flush workRaised mounting anchors.
- Blade identityLaser-etched markings.
- Cutting shapesDifferent teeth for different work.
Technical Specifications
- Cutting widths
- 1-3/8 in
- Mount
- OPEN-LOK
- Metal edge
- Carbide teeth
- Mixed-material edge
- Bi-metal
- Hardwood teeth
- PRO-CURVE Japanese
- Coating
- Black oxide
Choose the Correct Fit
Match the OPEN-LOK anchor to your multi-tool’s accessory holder. Confirm model-specific fit and any required adapter before ordering.
Identify concealed pipes, wiring and fasteners before a plunge cut. Match the tooth material and available depth to the work.
Installation & Care
Remove the battery or unplug the tool before changing the blade. Seat the anchor fully and tighten the clamp as the tool manual directs.
Let the teeth do the work without excessive pressure. Allow the blade to cool, then inspect it for missing teeth, cracks or bending.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Tell Willy your multi-tool model and the materials in the job to check whether this assortment covers them.
Important Product Questions
Which blades are included?
The set includes three 1-3/8 in blades: carbide teeth for metal, bi-metal for mixed materials and PRO-CURVE Japanese teeth for clean hardwood.
Can every blade in the set cut metal?
No. Choose carbide or bi-metal only for their specified materials. Japanese-tooth and HCS wood blades are for clean wood and soft materials, not embedded metal.
Will this fit my oscillating tool?
Match the OPEN-LOK interface to the exact tool model and check whether an adapter is needed. Do not assume Starlock compatibility.
