Milwaukee
Milwaukee Tool M18 FORCE LOGIC Press Tool Kit w/ One-Key with 1/4"-7/8" Streamline ACR Jaws
- SKU:
- MLW2922-22M
- Availability:
- Usually Ships Same Day
- Weight:
- 46.88 LBS
Description
DUTY®
Streamline ACR
Press Tool Kit
Start 1/4–7/8 in OD Streamline ACR pressing with a brushless M18 tool, matched jaws and ONE-KEY features.
Product Overview
The kit pairs the 2922-20 tool with six ACR jaw sizes. Its in-line shape aids access.
Auto-cycle controls the press sequence. A battery check prevents starts with insufficient charge.
- Matched systemMueller Streamline ACR jaws.
- Press controlAuto-cycle operation.
- Battery checkChecks charge before pressing.
- Connected recordsONE-KEY press reporting.
Technical Specifications
- Supplied jaw range
- 1/4–7/8 in OD
- Fitting system
- Streamline ACR
- Motor
- Brushless
- Press cycle
- Automatic
- Battery check
- Pre-press
- Tool management
- ONE-KEY
Choose the Correct Fit
Match the jaw to tube OD and Mueller Streamline ACR fittings. Other systems require their own approved jaws or rings.
The supplied jaws cover 1/4, 3/8, 1/2, 5/8, 3/4 and 7/8 in OD. A 1-1/8 in ring and ring jaw are separate accessories.
Installation & Care
Remove the battery before accessory changes. Prepare the tube and fully insert it as the fitting maker directs.
Inspect completed connections and follow system testing requirements. ONE-KEY press data does not replace inspection of the actual joint.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need the right press kit? Give Willy the fitting system, tube OD range and any existing jaws or rings you want to use.
Important Product Questions
What power accessories are supplied?
Milwaukee lists the 2922-20 tool, two CP2.0 batteries, a multi-voltage charger, six ACR jaws, an ACR press gauge and carrying case.
Can it press 1-1/8 in ACR tubing as supplied?
The supplied jaw set stops at 7/8 in OD. The 1-1/8 in Streamline ACR ring and required adapter jaw are sold separately.
Does a recorded press prove the system is leak-free?
No. Follow the fitting maker’s inspection and system-test procedures. Tool operation records are supporting information rather than a substitute for those checks.
