Milwaukee
Milwaukee Tool Grinder Flange Nut Kit
- SKU:
- MLW48-03-1050
- Availability:
- Usually Ships Same Day
- Weight:
- 0.40 LBS
Description
DUTY®
Grinder Flange
Nut & Spanner
A 5/8-11 flange nut and spanner set for most small angle grinders with the matching spindle thread.
Product Overview
The round flange nut has face holes for the pin spanner. A flat, fork-ended wrench is included.
Check the spindle thread and accessory mounting stack before fitting a replacement nut.
- Spindle threadFits a 5/8-11 spindle.
- Grinder selectionFor most small angle grinders.
- Pin engagementSpanner engages the nut face.
- Matched toolsNut and wrench supplied.
Technical Specifications
- Spindle thread
- 5/8-11
- Grinder fit
- Most small angle grinders
- Accessory use
- Wire wheels / brushes
- Nut profile
- Round flange
- Nut engagement
- Pin spanner
- Wrench profile
- Flat, fork-ended
Choose the Correct Fit
Confirm the grinder’s spindle thread and the flange arrangement required for the chosen wheel or brush. A matching thread alone does not establish every part of the fit.
Disconnect power or remove the battery before changing accessories. Clean the threads and inspect the nut, backing flange and wrench pins for damage.
Installation & Care
Arrange the accessory and flanges exactly as the grinder manual specifies. Engage the spanner pins fully and use the prescribed spindle-lock and tightening procedure.
Check that the accessory is properly seated and clears the guard before use. Keep speed ratings and guard requirements matched to both grinder and accessory.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Send Willy the grinder model, spindle thread and accessory type to check the flange set.
Important Product Questions
Does a 5/8-11 spindle guarantee this kit will fit?
It fits most small angle grinders with that spindle. Check your model’s flange arrangement and the selected accessory before ordering.
How is the nut tightened?
The supplied pin spanner engages holes in the nut face. Follow the grinder manual for spindle locking, flange orientation and tightening.
Can I reuse a nut with worn threads or damaged face holes?
Replace damaged mounting hardware. Clean and inspect the spindle, flanges and wrench before assembling the accessory.
