Milwaukee
Milwaukee Tool Flat Boring Bit 3/8" x 6"
- SKU:
- MLW48-27-0371
- Availability:
- Usually Ships Same Day
- Weight:
- 0.10 LBS
Description
DUTY®
Flat Boring
Wood Boring Bit
Bore 3/8 in holes with this 6 in flat bit for wood, plastic and laminates.
Product Overview
The 3/8-inch cutting head bores wood, plastic, plywood and Formica with a resharpenable edge.
The 6-inch body has a heat-treated high-carbon steel point and cutting edge for repeated boring.
- Heat-treated steelSupports a durable edge.
- ResharpenableRestore the point and edge.
- Material versatilityWood, plastic and laminates.
- Flat-boring designOpenings for everyday fitting.
Technical Specifications
- Hole diameter
- 3/8 in
- Bit length
- 6 in
- Bit material
- High-carbon steel
- Treatment
- Heat treated
- Edge care
- Resharpenable
- Work materials
- Wood, plastic, laminates
Choose the Correct Fit
Check for hidden services or embedded metal before drilling. Clamp the work and use backing where the exit finish matters.
Confirm the chuck connection and the tool’s capacity for the bit diameter; support the tool before the cutting edge engages.
Installation & Care
Use a controlled feed and clear chips as needed. Stop the tool before removing packed debris or inspecting the point.
Let the bit cool after use. Clean the cutting edge and inspect it for wear before the next hole.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need to match a flat bit to a hole and workspace? Send Willy the diameter, reach and material.
Important Product Questions
How can I reduce breakout at the far face?
Use a backing board when practical and ease the feed as the cutter approaches the exit. Secure both workpiece and backing.
Is the stated length the available drilling depth?
Allow for the shank held in the chuck and any tool clearance. Verify the working reach before committing to a deep hole.
What should I check if cutting becomes difficult?
Stop and inspect for packed chips, a dull or damaged edge, and hidden material. Do not compensate for a damaged bit by forcing the drill.
