Milwaukee
Milwaukee Tool Extreme Thin Metal Compact Band Saw Blade 3PK
- SKU:
- MLW48-39-0619
- Availability:
- Usually Ships Same Day
- Weight:
- 0.50 LBS
Description
DUTY®
35-3/8 in Band Saw
12/14 TPI Metal Blades
Match the 35-3/8 in loop and 12/14 TPI tooth pitch to the saw and metal section.
Product Overview
The 48-39-0619 Extreme Metal band saw blade uses a 35-3/8 in loop for compact portable band saws. This listing supplies 3 blades with a 12/14 TPI tooth pattern.
Variable-pitch teeth handle different metal thicknesses, including thin, hard metal. Match the saw’s blade dimensions and select the tooth pitch for the material and wall thickness.
- Variable tooth pitchThe tooth spacing supports a range of metal thicknesses.
- Thin-metal cuttingThe 12/14 TPI pattern is intended for the listed metal work.
- Portable saw formatThe 35-3/8 in loop matches the specified saw size.
- Controlled cut qualityCorrect tooth engagement helps produce clean metal cuts.
Technical Specifications
- Model
- 48-39-0619
- Blade length
- 35-3/8 in
- Tooth pitch
- 12/14 TPI
- Blade class
- Extreme Metal
- Saw format
- Compact
- Application
- Metal cutting
Choose the Correct Fit
Confirm that the saw requires a 35-3/8 in blade. Match the full blade specification, not just the compact or deep-cut label.
Select the 12/14 TPI tooth pattern for the metal thickness and keep appropriate tooth engagement throughout the cut.
Installation & Care
Disconnect the saw before changing the blade. Follow its instructions for blade orientation, tracking and tension.
Secure the stock and inspect the blade for worn teeth, cracks or deformation. Allow the blade to stop before removing offcuts.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help choosing this item? Share model 48-39-0619 and the tool, material or application you need to confirm.
Important Product Questions
How many blades are supplied?
This listing supplies 3 blades under model 48-39-0619.
What length does the saw need?
The saw must accept the 35-3/8 in loop and the remaining blade dimensions required by its manual.
What does the TPI figure mean?
12/14 TPI identifies the tooth pitch. Select it for the material and wall thickness rather than choosing by blade length alone.
