Milwaukee
Milwaukee Tool Adaptor for Other Major Brands of Punches and Dies
- SKU:
- MLW49-16-2685
- Availability:
- Usually Ships Same Day
- Weight:
- 2.20 LBS
Description
DUTY®
Other-Brand Die
Adapter
Use suitable other-brand punches and dies with the Milwaukee FORCE LOGIC knockout arrangement.
Product Overview
The manufacturer diagram shows separate small- and large-punch setups around this adapter.
Draw studs, spacers and any thread adapter must match the selected punch and die system.
- Tool systemMilwaukee FORCE LOGIC
- Die choiceOther major brands
- Setup selectionSmall or large punch
- Spacer checkUse only when required
Technical Specifications
- Power-unit fit
- Milwaukee FORCE LOGIC
- Punch/die fit
- Other major brands
- Small stud setup
- 3/4 x 3/8 or 7/16 in
- Large stud setup
- 3/4 in
- Thread adapter
- 3/4 x 1-1/8 in
- Spacer setup
- As required
Choose the Correct Fit
Check the exact power unit, punch, die and draw stud before assembly. Other-brand components must match the arrangement shown in the Milwaukee manual.
The small-punch diagram shows a 3/4-inch by 3/8-inch or 7/16-inch draw stud. Choose the one required by the mating punch.
Installation & Care
The large-punch arrangement shows a 3/4-inch draw stud and a 3/4-inch by 1-1/8-inch thread adapter. Use spacers only where the system calls for them.
Remove the battery before changing knockout accessories and hand-tighten the threads as directed. Keep hands away from the punch and die during operation.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Tell Willy the Milwaukee power-unit model and the other-brand punch, die and draw stud to help confirm the adapter setup.
Important Product Questions
What does this adapter allow?
Milwaukee specifies this adapter for fitting other major brands of small and large punches and dies to its FORCE LOGIC knockout arrangement.
Are all listed setup parts included?
The specifications describe the required assembly arrangements. They do not establish that draw studs, spacers or a thread adapter are included with this adapter.
Do both small and large punches use the same setup?
No. The manual shows different draw-stud arrangements and a separate thread adapter in the large-punch setup. Follow the diagram for the selected components.
