Milwaukee
Milwaukee Tool 9 in. Locking Clamp With Swivel Jaws
- SKU:
- MLW48-22-3523
- Availability:
- Usually Ships Same Day
- Weight:
- 1.02 LBS
Description

DUTY®
9-Inch Swivel-Jaw
Locking Clamp
A 9-inch TORQUE LOCK clamp with swivel pads jaws for controlled work holding.
Product Overview
The 9-inch clamp uses swivel pads to steady contact against varied workpiece surfaces.
The TORQUE LOCK screw accepts a screwdriver for leverage when adjusting the clamping force.
- Swivel jaw padsStabilize work contact.
- Locking pressureThumb-screw adjustment.
- Controlled releaseOne-handed release.
- Surface protectionRust-resistant finish.
Technical Specifications
- Nominal size
- 9 in
- Jaw style
- Swivel pads
- Adjustment
- TORQUE LOCK
- Jaw treatment
- Hardened
- Release
- One-handed
- Rust protection
- Corrosion resistant
Choose the Correct Fit
Check both the opening and throat clearance against the workpiece. The 9-inch designation is a nominal tool size, not the clamping capacity.
Support the pieces independently while positioning the jaws. Keep hands clear of the handle linkage and closing pads.
Installation & Care
Adjust the thumb screw so the clamp holds firmly without crushing the material. Release the handles carefully because stored force can move the work.
Remove filings and residue from the jaws after use. Check the pivot, screw and release mechanism before storing the clamp.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Tell Willy the workpiece thickness, reach needed and surface finish. We can help compare this 9-inch swivel pads clamp with other jaw styles.
Important Product Questions
Is the nominal size the maximum jaw opening?
No. Nominal clamp length is not jaw capacity. Verify the actual opening and reach against the workpiece.
Will the jaws leave marks?
Swivel pads help protect the contact surface, but excessive pressure or debris can still leave marks. Test on a concealed area.
Can I use this as a lifting clamp?
No. A locking hand clamp is for holding work during a task, not suspending or lifting a load.