Milwaukee

Milwaukee Tool 9/16" x 54" Flexible Cable Auger Bit

(No reviews yet) Write a Review
SKU:
MLW48-13-8256
Availability:
Usually Ships Same Day
Weight:
0.65 LBS
*Images are for visual reference only.
  • Milwaukee Tool 9/16" x 54" Flexible Cable Auger Bit
  • Milwaukee Tool 9/16" x 54" Flexible Cable Auger Bit
  • Milwaukee Tool 9/16" x 54" Flexible Cable Auger Bit
  • Milwaukee Tool 9/16" x 54" Flexible Cable Auger Bit
  • Milwaukee Tool 9/16" x 54" Flexible Cable Auger Bit
  • Milwaukee Tool 9/16" x 54" Flexible Cable Auger Bit
$54.97
Frequently bought together:

Description

Built for the TradesReady for What’s Next
Nothing butHEAVY
DUTY®
FLEXIBLE CABLE BITS

Flexible Cable
Wire-Install Bit

Bore 9/16 in cable routes behind walls or between floors with this 54 in flexible bit.

MODEL48-13-8256

Product Overview

The flexible steel bit is 54 in overall for wire routing behind walls and between floors.

Its 9/16 in cutter opens the route; holes at both ends help pull wire through after drilling.

  • Flexible shaftBehind-wall access.
  • Three-flat shankHelps prevent chuck slip.
  • Dual pulling holesWire pulling at each end.
  • Wall-space accessBehind and between walls.

Technical Specifications

Hole diameter
9/16 in
Bit length
54 in
Shaft material
Steel
Shaft design
Flexible
Shank
3-flat
Wire attachment
Holes at both ends

Choose the Correct Fit

Inspect the drilling route for electrical wiring, pipe and structural restrictions before placing the bit inside a wall.

Use a suitable placement guide to control the cutter’s position; avoid forcing an unknown path through a concealed cavity.

Installation & Care

Disconnect the drill before attaching wire to a pull-through hole. Pull slowly and stop if the cable snags.

Remove debris after use and inspect the shaft for kinks or damage. Store it without forcing sharp bends.

Small Details. Big Jobsite Energy.

Get set. Stay focused. Make your next move count.

BRING ON
THE NEXT JOB.
Willy, GetPipe.com support mascot

Ask Willy:

Planning a concealed cable run? Send Willy the hole diameter, required reach and access available at the wall or floor.

Important Product Questions

Is a flexible shaft enough to locate the hole?

No. Confirm the route before drilling. Milwaukee identifies placement guide 48-08-0275 for positioning these cable bits inside walls.

Where can I attach the wire?

There are pull-through holes at both ends. Disconnect the drill before attaching the wire and protect its jacket while pulling.

Can I keep using a sharply kinked shaft?

Stop and inspect it. A damaged shaft can be difficult to control; replace it when its condition no longer permits safe use.

View AllClose

Reviews