Milwaukee
Milwaukee Tool 7" / 9" Large Angle Grinder Cutting Shroud
- SKU:
- MLW49-40-6120
- Availability:
- Usually Ships Same Day
- Weight:
- 6.53 LBS
Description
DUTY®
Large Angle Grinder Cutting Shroud
7 in. / 9 in. · Cutting applications
Product Overview
This 7 in. or 9 in. cutting shroud requires a matching spindle collar. Check the named grinder models.
Use only recommended diamond wheels. Do not use flap discs or resin-bonded grinding wheels.
- Wheel Capacity7 in. or 9 in.
- Depth AdjustmentAdjustable cutting depth.
- Guide PlateGuides cutting depth.
- Collar FitMatching collar required.
Technical Specifications
- Model
- 49-40-6120
- Wheel Capacity
- 7 in. or 9 in.
- Port OD
- 1-7/16 in.
- Port ID
- 1-3/16 in.
- Adapter OD
- 1-3/4 in.
- Adapter ID
- 1-1/2 in.
Confirm the Grinder Fit
Milwaukee names 2785-20 and 6088-30. The shroud will not work on grinders without the same spindle-collar design; follow the assembly instructions.
Use the exact tool and shroud model numbers when checking your setup. Confirm the required collar, wheel and extraction connections before ordering.
Use the Specified Wheels
Use only recommended diamond abrasive wheels installed according to the instructions. Flap discs and resin-bonded grinding wheels are not acceptable.
Read the shroud, grinder and vacuum instructions before use. Confirm package contents separately from the components required to assemble the system.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help with model 49-40-6120? Share your tool model and the accessory or package detail you would like the GetPipe.com team to confirm.
Important Product Questions
Which grinders does the product page name?
Milwaukee names models 2785-20 and 6088-30. The manual also requires the matching spindle-collar design; do not infer fit for other grinders.
Can bonded grinding wheels be used?
No. Use only recommended diamond abrasive wheels according to the instructions. Flap discs and resin-bonded grinding wheels are not acceptable for this shroud.
What cutting-wheel capacity is listed?
The manual lists a cutting-wheel capacity of 7 in. or 9 in. Confirm the wheel and collar requirements for the complete setup.
