Milwaukee
Milwaukee Tool 7/8" x 16" Flat Boring Bit
- SKU:
- MLW48-27-0190
- Availability:
- Usually Ships Same Day
- Weight:
- 0.30 LBS
Description
DUTY®
Extended Flat
Wood Boring Bit
Bore 7/8 in holes with this 16 in long-reach wood bit.
Product Overview
Bore 7/8-inch wood holes with the 16-inch body, adding reach without a separate extension.
Double wing spurs score the hole; a chip-clearing edge moves material away to release heat.
- Extended reachDrill deeper with one bit.
- Double wing spursHelp limit hole breakout.
- Chip-clearing edgeMoves chips to release heat.
- Quick-change hexUniversal QUIK-LOK fit.
Technical Specifications
- Hole diameter
- 7/8 in
- Bit length
- 16 in
- Shank
- 1/4 in quick-change hex
- Spurs
- Double wing
- Extension fit
- Universal QUIK-LOK
- Work material
- Wood
Choose the Correct Fit
Check for hidden services or embedded metal before drilling. Clamp the work and use backing where the exit finish matters.
Confirm the chuck connection and the tool’s capacity for the bit diameter; support the tool before the cutting edge engages.
Installation & Care
Use a controlled feed and clear chips as needed. Stop the tool before removing packed debris or inspecting the point.
Let the bit cool after use. Clean the cutting edge and inspect it for wear before the next hole.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need to match a flat bit to a hole and workspace? Send Willy the diameter, reach and material.
Important Product Questions
How can I reduce breakout at the far face?
Use a backing board when practical and ease the feed as the cutter approaches the exit. Secure both workpiece and backing.
Is the stated length the available drilling depth?
Allow for the shank held in the chuck and any tool clearance. Verify the working reach before committing to a deep hole.
What should I check if cutting becomes difficult?
Stop and inspect for packed chips, a dull or damaged edge, and hidden material. Do not compensate for a damaged bit by forcing the drill.
