Milwaukee
Milwaukee Tool 7/16" x 18" Ship Auger Bit
- SKU:
- MLW48-13-5520
- Availability:
- Usually Ships Same Day
- Weight:
- 0.55 LBS
Description
DUTY®
Ship Auger
Wood Drilling Bit
Cut 7/16 in holes in clean or nail-embedded wood with this 18 in ship auger bit.
Product Overview
The 7/16 in cutter uses a through-center design to strike nails while boring holes for wire or pipe.
The 18 in bit has wide, coated flutes that move chips out of holes and resist sticky buildup.
- Nail resistanceHardened 20° cutting face.
- Coated flutesHelp prevent chip buildup.
- Through-center cutSolid point strikes nails.
- Impact-rated shankFor impact-wrench use.
Technical Specifications
- Hole diameter
- 7/16 in
- Bit length
- 18 in
- Cutting design
- Through-center
- Rake angle
- 20°
- Flute finish
- Polished and coated
- Shank rating
- Impact rated
Choose the Correct Fit
Check the path for wiring, pipe and structural hardware. Nail resistance does not make every concealed object safe to drill.
Confirm the shank fit and the tool’s wood-boring capacity. Secure the bit and brace the tool before starting.
Installation & Care
Withdraw as needed to clear chips from deeper holes. Stop and isolate the tool if the bit binds.
Let the bit cool before cleaning. Inspect the feed screw and cutting edge, especially after striking embedded nails.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need a ship auger for framing or utility work? Tell Willy the hole diameter, wood thickness and tool chuck.
Important Product Questions
Can it be used in wood containing nails?
Yes. Its hardened cutting face and through-center geometry are designed for nail-embedded wood as well as clean wood.
Is the full bit length usable drilling depth?
No. Overall length includes the shank. Check the exposed cutting reach after the bit is installed.
Can I use it with an impact wrench?
The shank is impact rated. Confirm the wrench’s connection, any required adapter and permitted drilling capacity before use.
