Milwaukee
Milwaukee Tool 7-1/2" FACE SPANNER WRENCH
- SKU:
- MLW49-96-7205
- Availability:
- Usually Ships Same Day
- Weight:
- 0.20 LBS
Description
DUTY®
7-1/2 in
Face Spanner
A face spanner for securing or removing the matching flange nut on compatible Milwaukee angle grinders.
Product Overview
The 7-1/2 in angled steel spanner reaches the matching flange nut during wheel changes.
Check the grinder model and flange before selecting it; wrench length alone does not prove fit.
- Wheel-change toolTurns matched flange nut.
- Angled accessAngular wrench profile.
- Steel constructionMetal service-tool body.
- Protective finishBlack-oxide surface.
Technical Specifications
- Length
- 7-1/2 in
- Material
- Steel
- Finish
- Black oxide
- Grinder size range
- 4-1/2–5 in
- Hook depth
- 11/16 in
- Profile
- Angular
Choose the Correct Fit
Check the grinder model and service-parts list for this wrench. Wheel diameter alone does not establish flange compatibility.
Disconnect the grinder from power or remove its battery before wheel service. Follow the grinder’s spindle-lock and flange procedure.
Installation & Care
Engage the wrench fully and turn the flange nut as instructed. Do not use the wrench to restrain a rotating spindle or start the grinder with it attached.
Remove the spanner after service and inspect it for bent or worn contact points. Store it with the grinder’s service accessories.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help with this selection? Tell Willy the equipment model, working connection and intended task so the GetPipe team can check the fit.
Important Product Questions
Will it fit every 4-1/2- or 5-inch grinder?
No. Confirm the exact grinder and flange against the service-parts information. Similar wheel sizes can use different flange interfaces.
Can I use it while the grinder is powered?
Disconnect power or remove the battery before changing accessories. Never engage a spanner with a moving spindle.
How tight should the flange nut be?
Follow the specific grinder’s installation instructions. Do not use an improvised extension or excessive force to tighten the flange.
